Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
• There is not enough free space to record on the built-in memory (8GB (SMX-F33(2)BP/LP/RP/SP only)/16GB (SMX-F34(0)BP/LP/RP/SP only)) or memory card. • Check if memory card is not inserted or write-protect tab is set to lock. • The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a while in a cool place. • Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for about 1 hour in a cool place. .page 102 • The estimated recording time may vary depending on contents and features used. • Recording a fast-moving subject increases the bit rate and consequently the amount of storage space required for the recording, which can lead to a shorter available recording time. The recording stops automatically. • There is no more free space for recording on the storage media. Back up important files on your PC and format the storage media or delete the unnecessary files. • If you make a frequent recording or deletion of files, the performance of the built-in flash memory (8GB (SMX-F33(2)BP/LP/RP/SP only)/16GB (SMXF34( 0)BP/LP/RP/SP only)) will be deteriorated. In this case, format the built-in memory (8GB (SMX-F33(2)BP/LP/RP/SP only)/16GB (SMX-F34(0)BP/LP/RP/ SP only)) again. • If you use the memory card with low writing speed, the memory camcorder automatically stops recording the movie images and the corresponding message appears on the LCD screen. • The memory camcorder is unable to record these levels of brightness. English_112 troubleshooting Recording Symptom Explanation/Solution When the screen is exposed to the direct sunlight during recording, the screen becomes red or black for an instant. During recording, the date/time does not display. Do not leave the memory camcorder with the LCD screen exposed to direct sunlight. • "Date/Time" is set to off. Set the "Date/Time" to on. .page 86• The beep sound is not heard. There is a time difference between the point where you press Recording start/stop button and the point where the recorded movie starts/stops. The recording stops. Set "Beep Sound" to "On". Beep sound is temporally off while recording movies. When the AV cable is connected to the memory camcorder, the beep sound will automatically turn off. • • • On your camcorder, there may be a slight time delay between the point when you press Recording start/stop button and the actual point where the recorded movie starts/stops. This is not an error. • The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a while in a cool place. Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for about 1 hour in a cool place. .page 102 • • You cannot record a photo image. Set your memory camcorder to Photo Record mode. .page 22 Release the lock on the write-protection tab of the memory card if any. The storage media is full. Use a new memory card or format the storage media. .page 83 Or remove unnecessary images. .page 75 • • • English_113 Adjusting the image during recording Symptom Explanation/Solution Focus does not adjust automatically. Colour balance of image is not natural. White balance adjustment is required. Set proper "White Balance". .page 59 • The backlight function does not function. While recording in EASY Q mode, the backlight function does not work.• The image appears too bright or flickering, or changes in colour. • Set "Focus" to "Auto". .page 62 • The recording conditions are not suitable for auto focus. Adjust the focus manually. .page 62 • The lens is dusty on the surface. Clear the lens and check the focus. • Recording is being made in a dark place. Light up to brighten the place. • This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel "iSCENE" to minimize this phenomena. .page 58 English_114 troubleshooting Playback on your memory camcorder SymptomExplanation/Solution Using the playback (Play/Pause) button would not start playing. The Skip or Search function does not work properly. Playback is interrupted unexpectedly. You cannot hear the sound when playing movie recorded by Time Lapse Recording. Photo images stored on a storage media are not displayed in the actualsize. • Press the MODE button to set Movie Play mode. ( ) • Image files recorded using other device may not be played on your memory camcorder. • Check out the memory card compatibility. .page 41 • If the temperature inside the camcorder is too high, it can not function properly. Turn the camcorder off, wait for a few moments, and turn it on again. • Check the AC adaptor or battery pack is properly connected and stable. • The Time Lapse recording does not support the sound input. (mute recording) .page 69 • Photo images recorded on other device may not appear in the actual size. This is not an error. Playback on other devices (TV, etc.) • Connect the audio line of the AV cable to your camcorder or to the connected You cannot vi...
Эта инструкция также подходит к моделям:Видеокамеры - SMX-F300BP (11.19 mb)
Видеокамеры - SMX-F300RP (11.19 mb)
Видеокамеры - SMX-F300SP (11.19 mb)
Видеокамеры - SMX-F30BP (11.19 mb)