Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Wolf Appliance Company, модель L342212

Производитель: Wolf Appliance Company
Размер: 193.97 kb
Название файла: Pro_Hood_Liner_Install.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The shape of the decorative hood is not critical as long as the hood liner fits completely inside the hood. The decorative hood and liner must fit together at the bottom edge in both width and depth. The height of the hood does not have to match the height of the liner. Interior dimensions of the decorative hood must exceed exterior dimensions of the liner. Refer to pages 6–7 for dimensions of the hood liner. The lower 3/4" (19) of the 4" (102) reveal is stainless steel and the rest of the reveal is aluminum. Make sure the bottom edge of the liner does not extend more than 3/4" (19) below the decorative hood for a finished look. BLOWER ASSEMBLIES Wolf pro ventilation hood liners are shipped without the blower assembly. Internal, in-line and remote blowers are available through your authorized Wolf dealer. For local dealer information, visit the find a showroom section of our website, wolfappliance.com. The blower will vary in size and is dictated by the cooking surface, the volume of air that needs to be moved and the length of the duct run. Refer to ventilation recommenda- tions in the Wolf design guide. IMPORTANT NOTE: Use only a Wolf blower with the pro hood liner. Pro Hood Liner Specifications Overall Dimensions PRO HOOD LINERS WIDTH MINUS 6" (152) 13/8" (35) 223/4" 3" 3" 12" (578) (76) (76) (305) 12" (305) 4" (102) 221/2" (572) 343/8" (873), 403/8" (1026), 463/8" (1178) 523/8" (1330) AND 583/8" (1483) WIDTHS Installation PRO HOOD LINERS E6" (152) 5" (127) LOCATION OF ELECTRICAL WIDTH OF LINER HOOD LINER DECORATIVE HOOD 30" (762) TO 36" (914) TO COUNTERTOP* 12" (305) HEIGHT OF LINER 221/2" (572) DEPTH OF LINER Pro Hood Liner Specifications wolfappliance.com/specs Installation Specifications The illustration and chart below provides dimensions critical for proper installation of the pro ventilation hood liner. Dimension A in the illustration will vary with the width of the hood liner. Refer to the chart below. ProHoodLiners WIDTH OF LINER A 343/8" (873) 173/16" (437) 403/8" (1026) 203/16" (513) 463/8" (1178) 233/16" (589) 523/8" (1330) 263/16" (665) 583/8" (1483) 293/16" (741) 93/8" A TO CENTER OF TRANSITION (238) 6" (152) Pro hood liners. Electrical Requirements Wolf pro ventilation hood liners require a separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply within the shaded area shown in the installation illustration on the previous page. IMPORTANT NOTE: You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Risk of electrical shock. This ventilation hood must be properly grounded. Electrical service for the hood must be installed by a qualified electrician in accordance with all applicable national and local electrical codes. Pro Hood Liner Installation Install Ductwork To reduce the risk of fire, use only metal ductwork. IMPORTANT NOTE: Pro ventilation hood liners must exhaust ...

Эта инструкция также подходит к моделям:
Вентиляторы - L582212 (193.97 kb)
Вентиляторы - L402212 (193.97 kb)
Вентиляторы - L462212 (193.97 kb)
Вентиляторы - L522212 (193.97 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории