Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
1200SFD / 28 130 1200SDD / 28 131 PROJECT DATE SUBMITTED BY CONTRACTOR 1200SFD BY MATHEWS GRAPHIC PPPPPROJECTROJECTROJECTROJECTROJECT DDDDDATEATEATEATEATE SSSSSUBMITTEDUBMITTEDUBMITTEDUBMITTEDUBMITTED BYBYBYBYBY CCCCCONTRACTORONTRACTORONTRACTORONTRACTORONTRACTOR 1200SFD BY MATHEWS GRAPHIC DIMENSIONS 1200SDD / PERFORMANCE OPTIONS AND ACCESSORIES 28 998: 60 MIN. REMOTE TIMER 28 882 DEHUMIDISTAT - Activates high speed when indoor humidity rises above set point on control Note: Manufacturer WARRANTY reserves the right to change Units carry a 15 year warranty on the heat recovery core and a 2 specifications without notice. year replacement parts warranty. All units conform to CSA and UL Standards SPECIFICATIONS General: Unit shall be completely wired and includes blowers, filters, heat exchange cores and control panel. Cabinet: 297/8” x 411/2” x by 245/8” H. Constructed of 20 gauge satin white powder coated galvanized steel (G60) for superior corrosion resistance. Insulated with foil faced fiberglass duct liner to prevent condensation. Heat Exchange Core: Three modules, aluminum plate heat exchange core assembly held in stainless steel frame. Air filter: Six washable filters. Motors: Two efficient three speed PSC double shafted motors 120 V, 4 Amps each (8.1 Amps total on high speed), 1 ph. 1/4 HP, 1625 RPM. Watts - total on high speed - 972. Blowers: Centrifugal type rated at 1200 CFM (566 L/s) free air delivery. Each air stream has one double shafted motor driving a centrifugal blower. Rubber isolated mounts. Controls: Illuminated power switch, 3 speed blower control, low voltage (24 VAC) terminals for connection of remote controls and defrost light indicating automatic operation. Defrost: Model 1200SDD: Supply bypass routes indoor air to defrost core. Model 1200SFD: Supply fan shuts off while exhaust continues to defrost core. (Defrost light indicates defrost mode- Preset 27° F (-3°C)). Duct Connections: Four 20" X 8" (508mm X 200mm). Model 1200SDD has fifth 20" x 8" duct connection on top surface. Drain Connections: Two 1/2" O.D. Mounting: Unit to be set in support brackets hung by threaded rod type apparatus. (Brackets and rod not provided). Weight: 191 lbs (87Kg) Shipping Weight: 215 lbs (98Kg) Manufacturer: American ALDES Ventilation Corp. 4537 Northgate Court, Sarasota, FL 34234 VENTILATION 4537 NORTHGATE COURT SARASOTA, FL 34234-2124, USA Tel: 941 • 351- 3441 Fax: 941 • 351- 3442 458HRV-04-03 e-mail: info@aldes-us.com PRODUCT HRV 1200SFD/1200SDD PLUS SPECIFICATIIONS AND ENGINEERING HEAT RECOVERY VENTILATOR INFORMATION SPECIFICATIONS CORES -Modular (3 section) patented aluminum heat recovery cores arranged for efficient cross-flow ventilation. MOTORS - Two PSC, 3 speed double shafted, 120 VAC, 9.4 Amps each (18.8 total on high speed). HP - 1/2, 1625 RPM. Watts - total on high speed - 2256. FILTERS - Washable air filters in exhaust and supply air streams. BLOWERS -Centrifugal type rated at 1200 cfm (566 L/s) free air delivery. Each air stream has one double shafted motor driving 2 centrifugal blowers. CONNECTION DUCT SIZES -Four - 20” x 8” (508 mm x 200 mm). MOUNTING -Unit to be set on support brackets hung by threaded rod type apparatus (brackets and rods not provided). CASE -20 gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated with foil faced insulation where required to prevent exterior condensation. Drain connections, 2 - 1/2” (12 mm) O.D. CONTROLS & FUNCTION -Integrated microprocessor circuit board. Built-in interlock contacts. Automatic Self Test. Optional remote speed control. DEFROST CONTROLS Model 1200SFD PLUS - Interrupts supply air while exhaust air defrosts core. Model 1200SDD PLUS - Supply bypass routes indoor air to defrost core. WEIGHT -210 lbs. (95 kg) SHIPPING WEIGHT -234 lbs. (106 kg) HIGH SPEEDMED. SPEEDLOW SPEED DIMENSIONS 1200SFD/SDD PLUS inches (mm) OPTIONS WARRANTY 28 998 Sixty Minute Timer (2 Wire) Units carry a 15 year warranty on the heat recovery core 28 879 Digital Electronic Timer - 20, 40, 60 Minute (3 Wire) and a 2 year replacement parts warranty. 28 883 Dehumidistat Ventilation Control (DVC) Remote dehumidistat and on/off control (3 Wire) 28 882 Dehumidistat Control - Remote Wall Mount, Low Voltage 20-80% RH (2 Wire) 28 885 3 Speed Control (4 Wire) All units conform to CSA and UL standards. 9 PRODUCT SPECIFICATIONS AND ENGINEERING INFORMATION ----- SUBMITTAL DATA 460 - 0403 Standard Damper Defrost GENERAL FEATURES Thermally conductive aluminum heat exchange core, crossflow design, easily removed for cleaning or service. Insulated 20 gauge white powder coated galvanized steel cabinet. Direct drive centrifugal forward curve blowers, Multi-speed providing 600 to 1100 cfm. one in each air stream. Two efficient three speed PSC double shafted motors 120 V, 4 Amps each (8.1 Amps total on high speed), 1 ph. 1/4HP, 1625 RPM. Watts - total on high speed - 972. Washable filters, one in each air stream protect the core. Easy to a...
Эта инструкция также подходит к моделям:Вентиляторы - HRV 700SDD (3.6 mb)