Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Appliances fitted with a plug can be connected to any standard power socket within easy access. Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the local electricity board. When installing, an omnipolar disconnector with a distance of at least 3 mm between contacts must be provided. Fixed connection of the appliance must only be carried out by an authorised electrician. Electrical connection for UK only Safety warnings for the electrician Connect the hood to the mains supply via a double pole switch which has 3 mm minimum separation between the contacts. The switch must be accessible at all times. The following is valid in the United Kingdom only: -the wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E or by the earth symbol ( ), or coloured green or green and yellow; -the wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black, - the wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Wall unit mounting - Fig. 7 • Position the template on the wall (1) and mark the position, and drill (2) the holes (2 x O 8 mm). • Mount the two wall plugs with the hooks (3). • Hang the hood on the hooks and level it with the adjustment screws (4). • Remove the grease filters (5) and mark for the two screws (6). Remove the hood and drill the holes (2 x O 8 mm). Insert the rawl plugs (7) and hang the hood on the wall again. Adjust it with the screws (8) and secure it with the screws (9). • Mount the chimney support (10) with the wall plugs (9) and the screws (11). Be careful that it is centered over the hood and horizontally aligned. • Extractor version (S): Connect a tube between the hood air outlet and the wall or roof exhaust channel. Fix it with the tube clamps supplied. Filter version (K): Mount the deflector with the two screws supplied (2,9x13 mm) (13). • Make the electrical connection (14) (see previous page) • Place the chimney (15) and fix it to the top chimney support with the two screws (16) supplied (2,9x6,5 mm). Lower the bottom part of the chimney (17) and fasten it to the top of the hood with two screws, supplied (18) (2,9x6,5 mm). 16 Electric hob 500 mm Gas hob 650 mm Fig. 7 Exhaust tube Power outlet Exhaust tube Power outlet Electric hob 500 mm Gas hob 650 mm Wall bracket 8160 D 8260 D 8360 D 8361 D 8190 D 8290 D 8390 D 8391 D Electric hob 500 mm Gas hob 650 mm From the Electrolux Group. The world.s No.1 choice. The Electrolux Group is the world.s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgerate GmbH Postfach 1036 D-9032...
Эта инструкция также подходит к моделям:Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)