Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Light switch Motor switch 8260 D - 8290 D • the light switch switches the hood lamp on and off • the motor switch switches the motor off • Speed 1: Speed 1 push-button • Speed 2: Speed 2 push-button • Speed 3: Speed 3 push-button Light switch Speed 3 Speed 2 Motor switch Speed 1 Control Panel 8360 D -8361 D - 8390 D - 8391 D • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the unit’s front panel: A -Mains switch, OFF. B C D E F G ------ Start and choice of motor speed 1-2-3-1-2......... Indicates speed 1 (LED). Indicates speed 2 (LED) Indicates speed 3 (LED) Indicates Intensive speed (LED). Intensive speed on/off. The Intensive speed runs for 5 minutes: If the hood is on when the Intensive speed is activated, the hood reverts to previous speed after 5 minutes. If the hood is off when the Intensive speed is activated, the hood will be turned off after 5 minutes. To interrupt the Intensive speed, press button A or B. H -Light ON/OFF Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds, then turn the hood back on again. 8 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild detergent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor’s protective grid. • Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders. • Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents. • It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard. Metal grease filter • The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal recycling function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks. Removing the metal grease filter • First, push the metal grease filter stop backwards, then extract the filter, pulling downwards. Fig. 3. Hand washing Soak grease filters for about one hour in hot water with a little washing-up liquid, then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry. Dishwasher Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refi...
Эта инструкция также подходит к моделям:Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)
Вентиляторы - 8190 D (342.38 kb)