|
Фрагмент инструкции
For the address of your local Service Force Centre and further information about Service Force, please visit the website at Please ensure that you have read the section “What to do if...” as the engineer will make a charge if the fault is not a mechanical or electrical breakdown even the appliance is under warranty. Please note that proof of purchase is required for in- guarantee service calls. Help us to help you Please determine your type of enquiry before writing or telephoning. When you contact us we need to know: • Your name • Clear and concise details of the fault • Address and post code • Name and model of the appliance* • Telephone number • E number* • Serial number* * This information can be found on the rating plate, which can be seen when the grease filters are removed. If you require Customer Service in the Republic of Ireland please contact us at the address below: AEG Electrolux Group (Ire) Ltd Long Mile Road Dublin 12 Republic of Ireland Tel: + 353 (0) 1 4090751 Email: service.eid@electrolux.ie CUSTOMER CARE DEPARTMENT For general enquiries concerning your AEG appliance or for further information on AEG products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at Customer Services Department Major Appliances AEGElectrolux Addington Way Luton Bedfordshire LU4 9QQ 08705 350 350 (*) * calls to this number may be recorded for training purposes Technical Details DK 4360 DK 4390 Dimensions (in cm): Height (Extract. mode): 62,2-115,2 62,2-115,2 Height (Recirc. mode): 69,9-115,2 69,9-115,2 Width: 59,8 89,8 Depth: 45 45 Max. absorb. power: Motor: 160 W 120 W 160 W 120 W Lighting: 2 x 20 W (G4) 2 x 20 W (G4) Length of the cable: Electrical connection: 150 cm 220-240 V 150 cm 220-240 V Fuse rating: 5At 5At Mounting accessories included 1 allen wrench (for TORX screws). 1 deflector , 1 reduction flange O 125-120 mm , 1 chimney support, 6 wood-screws 5 x 45 mm (for wall mounting) , 6 Wall dowels O 8 mm (for wall mounting) , 2 washers 2 screws 2,9 x 6,5 (2 to fix the upper chimney) 2 metal screws 3 x 9 (to fix the deflector). Electrical connection Safety warnings for the electrician Safety warnings for the electrician The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area apply a bi-polar switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over- current category III, in accordance with installation instructions. IMPORTANT: Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled. 63 Before beginning installation...
Эта инструкция также подходит к моделям:Вентиляторы - DK 4360 (2.99 mb)
Вентиляторы - DK 4390 (2.99 mb)
Вентиляторы - DK 4360 (2.99 mb)
Вентиляторы - DK 4360 (2.99 mb)