Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Step 4: Insert the fan blade (3) onto motor shaft by matching the hole shape in the blade with shaft and tighten the blade with balde cap (2) by turning counterclockwise. Step 5: Mount front guard (1) onto rear guard over rear guard and secure with clips on front guard (1). Step 6: Use tapping screw (16) to mount the bracket (15) if the desired position. mounting bracket must be kept at least 18” from the ceiling and should be mounted to wood surfaces to hold 20 pounds weight. Step 7: Firmly push the assembled fan onto the mounting bracket as shown DESCRIPCION DE LAS PARTES INSTRUCCIONES DE OPERACION POWER SUPPLY CORD: Plug the power supply cord into an outlet. SPEED: Speed is adjusted by pulling the strings. OFF: turns off th unit LOW: provides low speed MED: provides medium speed HIGH: provides high speed OSCILLATION: To make the fan oscillate sideways. push the oscllating pin provided on the motor housing. MAINTENANCE INSTRUCTIONS TO CLEAN: Always unplug the fan before cleaning or disassembling. Be sure to use a soft cloth moistened with mild soap solution. Do not immerse fan in water or allow water to drip into the fan housing. Avoid the use of gasoline benzine or thinner to clean, this will result in damage to the fan. Use a screwdriver to open the cap on the front guard frame to disassemble each part reverse the order assembly. TO STORE: Clean thoroughly and store in original box CABLE DE PODER Conecte el cable de poder un toma corriente para iniciar el flujo de electricidad. VELOCIDAD La velocidad se ajusta tirando de la cuerda. OFF: Apaga la unidad LOW: Provee velocidad baja MED: Provee velocidad media HIGH: Provee velocidad alta OSCILACION Para hacer que su ventilador oscile de la iaquierda a la derecha, tire de la perilla que esta ubicada encima del motor del ventilador. INSTRUCCIONES DE MANTENIMIENTO Para limpiar las cuchillas simplemente retire la rejilla frontal liberando los gan chos de agarre. Limpie las cuchillas y las rejillas con una tela humedecida con un detergente suave o agua. Seque por completo y coloque nuevamente la rejilla frontal en su lugar. No utilice limpiadores abrasivos. nunca sumerja en el agua el ventilador ni ninguna de sus partes. ALMACENAMIENTO: Limpie bien toda la unidad y guarde en su caja original OPERATING INSTRUCTIONS ...