Please note: You should avoid touching the zones when the hob is in use, or when an H is showing on the zone display. In the event of a power cut, the residual heat indicators will illuminate after the power supply is restored. However, when there is no power supply to the hob the residual heat indicators will not work, so extra care must be taken. Temperature Limiter The hob is equipped with a temperature limiting sensor that adjusts the power output of the hob if the bottom of the cookware bec

They will also help you make the most of your appliance. Keep this booklet in a safe place. It will be useful if you, or anyone else, have any questions about use of the appliance. This appliance must only be used for the purpose for which it was designed, i.e. for cooking foods. Any other use should be considered incorrect and therefore dangerous. The manufacturer is not responsible for damage caused by improper, incorrect or irresponsible use of the appliance. Declaration of CE conformity . Th

Turning the knob so that the indicator line points to the symbols printed on the panel achieves the following functions: . full circle . = closed valve . symbol – = maximum aperture or flow . symbol = minimum aperture or flow The maximum aperture position permits rapid boiling of liquids, whereas the minimum aperture position allows slower warming of food or maintaining boiling conditions of liquids. To reduce the gas flow to minimum, rotate the knob further anti-clockwise to point the indicator

Attention: Do not store flammable material in the oven, or the storage compartment. 26 Removal of the Inner Glass Door Panel – The inner glass door panel can easily be removed for cleaning by unscrewing the four screws (fig. 25). – When re-assembly ensure that the inner glass is correctly positioned and do not over tighten the screws. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the g

and who will – connect the blue wire to the terminal marked with the letter comply with the l.E.E. and local regulations. N or coloured black; The wires in the mains lead are coloured in accordance with the – connect the brown wire to the terminal marked with the let- following code: ter L or coloured red. Green & Yellow = Earth Blue = Neutral . It is possible to connect the appliance directly to the mains Brown = Live. supply by means of a heavy duty switch with 3 mm minimum distance between th

• Never use the hob top for storage. • Pan handles should never stand out beyond the edge of the worktop. This will ensure children cannot reach them. • Do not use pans with rough bases (e.g. cast iron) as these may scratch the hob surface. • Do not switch on the zones without cookware in place. • Do not lean over the hob when it is in use. • Follow the cleaning instructions carefully. • Ensure the base of the saucepan is clean and dry before placing it on the hob to prevent damage to the surfac

• Keep children away from the appliance when in use. • Never put cooking foil or plastic materials on the ceramic surface when the hob is hot. These materials could melt and cause damage to the hob. • Never use the hob top for storage. • Pan handles should never stand out beyond the edge of the worktop. This will ensure children cannot reach them. • Do not use pans with rough bases (e.g. cast iron) as these may scratch the hob surface. • Do not switch on the zones without cookware in place. • Do

omelettes 9 Fast frying steaks 5 for the zone required. The zone indicator will switch on to confirm the zone is active. Touch so the zone display shows 9. Touch again to set the required power level. The zone display will alternate between the required power level and A until the booster is complete, then it will show the required power level. Cooking zone power level 1 2 3 4 5 6 7 8 9 Fast heating time 1 min. 22 sec. 2 min. 44 sec. 4 min. 6 sec. 5 min. 28 sec. 6 min. 50 sec. 1 min. 22 sec. 2 m

symbol beside flame -max. heat/max. gas flow). -No gas-lighter (no . symbol beside knobs). . If the appliance has a safety valve system fitted (beside every burner is a T-shaped probe, as in Fig. 5.2 - not to be confused with the S-shaped electrode of the gas- lighter), the flow of gas will be stopped if and when the flame should accidentally go out. “1 GAS triple ring burner” COOKING HOB (Fig. 1.2) The appliance has class 3 COOKING POINTS 1. Triple ring burner - 3,50 kW CONTROL PANEL DESCRIPTIO

– Do not attempt to modify the technical properties of the appliance, as it may become dangerous to use. 4 4 Features and Technical Data HCG 741 .. Fig. 1a Fig. 1b 1124322 56789 5 Cooking Points 1. Auxiliary burner (A) - 1,00 kW 2. Semi-rapid burner (SR) - 1,75 kW 3. Rapid burner (R) - 3,00 kW 4. Triple ring burner (TR) - 3,50 kW Control Panel 5. Auxiliary burner control knob (1) 6. Rear left semi-rapid burner control knob (2) 7. Triple ring burner control knob (4) 8. Rapid burner control knob (