Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Important Safety Instructions Product Record (See Serial Plate Location Model No, 790. Serial No. Date of Purchase below) READ Save AND SAVE THESE INSTRUCTIONS. your sales receipt for future reference. Serial Plate Location • • o -ml • You will find the model and serial number printed on the serial plate. The serial plate is located on the right side of the oven front frame behind the warmer drawer compartment panel. Please see the illustration for exact location. record the serial number for future reference Product Record). Remember to (See above, under 5 Range Features Note: The features of your range will vary according to model. Your Electric Range Features At a Glance Electronic Surface Element Control (ESEC) Digital Bddgd Radiant Element Control Warm & Ready" Drawer Control and Indicator Light Electronic Oven Control with Clock and Kitchen Timer (color will vary by model) Warm & Ready" Zone Control and Indicator Light Dual Surface Simmer Easytodean Upswept Cooktop RoastingRack High Wattage Bake & Broil Oven Elements Latch Door SearingGrill Oven Convection Bake with Heating Element Adjustable Heavy-duty Oven Rack(s) pieceDoorHandle (stylevanas withmodel) BroilPan Inse_ Full Width Oven Door (stytevades with model) BroilPan _Warm&Ready TM Drawer with Rack Leveling Legs/' Anti-tip Bracket Warm & Ready" Zone Radiant Surface Element (included) 8"1,800WRadiant SurfaceElement 200W Radiant Surface Element Smoothtop 800W Radiant Surface Element 8"1,800WRadiant" 1000W SurfaceElement Dual Radiant Surface Element Ceramic Glass Cooktop 6 Setting Surface Controls FEATURE OVERVIEW General Cooktop Information About Radiant Surface Burners About the Ceramic Glass Cooktop Locations of the Radiant Surface The ceramic cooktop has radiant surface Elements and Controls elements located below the surface of the glass. CooktopAppearance Cooktopradiantareasthatheat The design of the ceramic cooktop outlines the ..... area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop (See Fig 1). Heat is transferred up through the surface of the cooktop to the cookware. Only flat-bottom cookware should be used. The type and size of cookware, the number of surface elements in use and their settings, are all factors that will affect the amount of heat that will spread to Figure 1 areas beyond the surface elements. The areas surrounding the elements may become hot enough to cause burns. About the Radiant Surface Elements The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle. +9++, Left front Left rear Ri htfront For efficient cooking, turn offthe element several minutes before cooking is complete. This wiltallow residual heat to complete the cooking process. Locations of the Radiant Surface Elements and Controls Your range is equipped with radiant surface burners with 6 different wattage ratings. T...
Эта инструкция также подходит к моделям:Варочные панели - 790.99014 (2.82 mb)
Варочные панели - 790.99019 (2.82 mb)
Варочные панели - 790.99014 (2.82 mb)
Варочные панели - 790.99013 (2.82 mb)