Оценок - , средний балл:
(
)
)
Производитель: HP
Размер: 1.22 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP StoreOnce 4500 Backup
1 About your HP StoreOnce
3 Rack installation
One Network Port must always be connected, even if you are using
the FC ports to back up and restore data to the HP StoreOnce
Start here
Backup system
4500 Backup. This is because the StoreOnce Management Console
The supplied rail kits allow you to install the HP StoreOnce Backup
requires an Ethernet connection to set up and manage devices.
system and Capacity Kits into square and round hole racks. If
The HP StoreOnce Backup system is a disk-based storage appliance
mounting the server into threaded hole or telco racks, please see
For further information and further connectivity options please refer to
for backing up host network servers or PCs to target devices on the
www.racksolutions.com to purchase mounting hardware.
the Installation and Configuration Guide and the HP StoreOnce CLI
appliance. These devices are configured as NAS Share, Virtual Tape
Reference Guide links on the CD-ROM.
Library or StoreOnce Catalyst Store targets for backup applications,
Always refer to the Safety Guide and the Installation and Configuration
such as HP Data Protector.
Guide on the HP StoreOnce Backup CD-ROM for detailed safety
information.
5 Connect the hardware
To find out which backup applications are compatible with HP
StoreOnce functions go to www.hp.com/go/ebs.
cauTIoN: Use extreme caution when installing and pulling units
from the rack; they can slip and fall, causing damage to the
Back panel
TIP: To find out more about configuring and using NAS target
HP StoreOnce Backup system or injury. HP is not responsible for
devices, FC and iSCSI virtual tape libraries, and Catalyst
any damage or injury caused by the mishandling of the
Stores, use the link to the HP StoreOnce Backup User Guide on
HP StoreOnce Backup system.
the CD-ROM supplied with the system.
WaRNING: Always use at least two people to lift and locate
HP StoreOnce Backup system Capacity Kit
an enclosure into the rack.
The Capacity Kit is an optional 12-disk expansion enclosure. Up to
three expansion enclosures may be installed at the same time as the
1. Install the rails in the rack, as required. Follow the instructions
HP StoreOnce Backup system or added later. A license is required for
provided separately with the rail kits.
each Capacity upgrade and is included with the kit.
2. Slide the HP StoreOnce Backup system into position in the rack
1. RAID controller card 1
7. iLO4 Management port - do
and secure it to the rack rails using thumbscrews on the front
2. FC card 1
NOT use for data connection
The following 12-disk expansion kits are available:
bezel.
3. 10GbE card
8. 1GbE network port1 (default)
• HP StoreOnce 4500/4700 24TB Capacity Kit (BB881A)
4. Power supply 1
9. 1GbE network ports 2, 3 and 4
• HP StoreOnce 4500 48TB Capacity Kit (BB909A)
NoTe: The label on the top of the HP StoreOnce Backup system
5. Power supply 2
contains useful identity information, such as the MAC address
6. Video/monitor connector
and default network name. Make a note of this information
2 Retrieve your license entitlement
before you install the appliance in the rack. There is also a
label with login information for the iLO4 management port.
Connecting to the network
certificates (if purchased)
3. If you have purchased the Capacity Kits install the expansion
1. Always use the supplied power cords to connect the HP StoreOnce
Licensing is used to enable optional product functionality, such as
enclosures directly below or above the HP StoreOnce Backup
Backup system to the mains power supply. For detailed safety
extra disk capacity, Replication, Catalyst or Security features. If you
system. Use the thumbscrews on the front of the chassis to secure
information, see the Safety Guide on the CD-ROM.
have purchased any of these features, you should activate the license
the expansion enclosure to the rack. (Remove the small side panels
2. Use any CAT-5E or CAT-6 network cable (also supplied with the
as soon as possible.
secured with blue tape to access the thumbscrew.)
product) to connect the network port(s) to a Gigabit Ethernet
network.
Replication, Catalyst and Security License Entitlement Certificates
are supplied electronically. For extra disk capacity the appropriate
4 Networking information
3. The Quick Install option is to connect LAN Port 1 to a DHCP-
License Entitlement Certificates are supplied as paper documents
enabled 1GbE network, which allows you to connect to and
in clearly marked card envelopes. These are valuable items so, to
manage the StoreOnce Backup system from any client attached
prevent them becoming lost, please ensure they are identified and put
NoTe: The HP StoreOnce Backup system does not support the
to the same network using the appliance’s network name. The
safely to one side during unpacking.
IPv6 protocol.
network name is on a label/sticker on the server. Once connected,
run the StoreOnce CLI network commands to optimize your
Entitlement certificates for iLO4 Advance Packs are also supplied with
There are four 1GbE network ports and two 10GbE network ports.
network configuration.
the HP StoreOnce Backup system.
Network bonding (1GbE with 1GbE, and 10GbE with 10GbE) is
It is strongly recommended that all licenses are redeemed as soon as
supported to provide bandwidth and failover benefits.
Connecting to a Fibre Channel (FC) SAN
possible. Go to the Webware site - webware.hp.com. For detailed
The physical network ports provide three network configuration
The HP StoreOnce Backup system is supplied with a FC card pre-
information about activating licenses refer to the HP StoreOnce
modes.
installed.
Installation and Configuration Guide on the StoreOnce CD-ROM.
• Single Port configuration: The HP StoreOnce 4500 Backup is
However, you must still connect the HP StoreOnce Backup system
NoTe: There is also an Instant on license (time limited to
connected to one network; only one network port is used.
to an Ethernet network in order to use the StoreOnce Management
90 days): This allows you to try out StoreOnce Replication
• Multiple subnet configuration: The HP StoreOnce 4500 Backup
Console.
and Catalyst licensable functionality before paying for a full
is connected to different networks. Two or more network ports are
Please note that devices created on the HP StoreOnce Backup system
license. It does not apply to extra disk capacity or Security
used and must be on different sub-nets.
can be accessed by all hosts on the SAN unless you configure zones
features. See the HP StoreOnce Backup User Guide for more
© Copyright 2014 Hewlet -Packard Development Company, L.P.
• High availability (Bonded) configuration: Multiple network ports
on the Fibre Channel Fabric/Switch.
information about this license and how to enable it.
are used, but the ports are bonded to provide port failover. The
The information contained herein is subject to change without notice. The only
bonded ports must be of the same speed: 1 GbE with 1GbE, and
warranties for HP products and services are set forth in the express warranty
NoTe: Licenses are locked to a specific appliance using
statements accompanying such products and services. Nothing herein should
10GbE with 10GbE.
be construed as constituting an additional warranty. HP shall not be liable for
the serial number that can be found on the StoreOnce
Three bonding modes are available: Mode 1 (Active/Backup),
technical or editorial errors or omissions contained herein.
management GUI, or printed on a label on the appliance.
Mode 4 (IEEE 802.3ad Dynamic Link Aggregation) and Mode 6
(Active Load Balancing). Take care to choose the network bonding
mode appropriate for your network environment and switch capability.
Part Number: BB878-90907
March 2014
*BB878-90907*
Edition: 1
BB878-90907
BB878-90907 StoreOnce 4500 Eng poster.indd 1
14/04/2014 09:28
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP D2D2502i SmartBuy Backup System (1.22 mb)
Устройства обработки данных - HP D2D2503i Backup System (1.22 mb)
Устройства обработки данных - HP D2D2503i SmartBuy Backup System (1.22 mb)
Устройства обработки данных - HP D2D2504i Backup System with Replication Promo LTU (1.22 mb)