Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The following example shows the Summary screen after the Capacity Upgrade Kit has been installed
and the HP StoreOnce Backup System has two shelves with 24 disks.
Planning for the Capacity Upgrade
IMPORTANT:
HP StoreOnce systems that do not contain any data will complete the expansion
process in around 5 minutes. Systems that already have data stored will take considerably longer
and the time required to complete the expansion process will depend on the number of capacity
upgrade shelves and the amount of data stored on the unit.
For example, an HP StoreOnce 4100 Series system running at close to full capacity will take up
to 12 hours in most cases but a HP StoreOnce 4300 Series system running at close to full capacity
(without any existing capacity upgrade) could take up to 48 hours, and potentially take over 96
hours to complete with an existing capacity upgrade.
Please note that all devices remain offline during the expansion process. No backup, replication
or tape attach scheduled jobs can occur and the process cannot be cancelled once started.
Make sure that host users are aware that the system will not be available for backup and restore
and check to see how any scheduled jobs, such as replication and tape backup, may be affected.
An overview of the capacity upgrade process
1.
Install the rails for the Capacity Upgrade Kit, which should be located directly below or above
the HP StoreOnce Backup System (Shelf 0 or Internal), see Chapter 2.
2.
Install the Capacity Upgrade Kit (HP D2D4100 Series: Shelf 1 or HP D2D4300 Seies: Shelf
1/2/3), see Chapter 2.
3.
Connect the Capacity Upgrade Kit (HP D2D4100 Series: Shelf 1 or HP D2D4300 Series:
Shelf 1/2/3) to the HP StoreOnce Backup System (Shelf 0 or Internal), see Chapter 2.
4.
Power on the Capacity Upgrade Kit, see Chapter 2.
5.
Make sure you know both the HP entitlement order number (supplied with the Capacity Upgrade
Kit) and the HP StoreOnce serial number (found on the label on the top of the unit). Obtain a
License To Use (LTU) from the HP Licensing website, see Chapter 3. If you are installing several
Planning for the Capacity Upgrade
5
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP D2D2502i SmartBuy Backup System (1.19 mb)
Устройства обработки данных - HP D2D2503i Backup System (1.19 mb)
Устройства обработки данных - HP D2D2503i SmartBuy Backup System (1.19 mb)
Устройства обработки данных - HP D2D2504i Backup System with Replication Promo LTU (1.19 mb)