Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
BB852-90901 Balham Eng back.pdf 1 19/09/2012 10:54
Further information about networks
NOTE: The HP StoreOnce Backup system does not support the IPv6 protocol.
7 Troubleshooting and other sources of
information
The physical network ports provide three network configuration modes.
For troubleshooting information, refer to the guides on the HP StoreOnceBackup system
• Single Port Configuration: The HP StoreOnce Backup system is connected to one
CD. These guides also contain reference information about iSCSI andRAID. If you cannot
network; only one network port is used (Port 1).
resolve problems, contact HP Support at www.hp.com/support.
• Dual Port Configuration: The HP StoreOnce Backup system is connected to two
For the latest information about computer, OS and software compatibility, see
different networks. Both network ports are used.
www.hp.com/go/ebs.
• High Availability (Bonded) Configuration: Both network ports are used, but the two
The following documents are available:
ports are bonded to provide port failover. This mode also provides load balancing
across the two network ports
• HP StoreOnce Backup User Guide (PDF): This guide describes how to use the Web
Management Console. It is also available as online help.
The default network configuration is single port with DHCP enabled. This can be
• HP StoreOnce CLI Reference Guide (PDF): This guide describes the StoreOnce CLI
amended after installation using StoreOnce CLI net config commands.
commands and how to use them.
If dual port configuration is required, the networks must be on different sub-nets.
• HP StoreOnce Backup Concepts Guide (PDF): If you are new to the HP StoreOnce
StoreOnce CLI Management Console
Backup system, it is a good idea to read this guide before you configure your system.
The High Availability mode is the recommended option, because it provides port failover,
The StoreOnce Command Line Interface (CLI) provides an alternative way of
It describes the StoreOnce technology and advises how to plan the workload being
but both network ports must be connected to the same switch and it must support port
administering and monitoring the system. Some tasks, such as network and storage
placed on the HP StoreOnce Backup system in order to optimize performance and
bonding.
configuration, can be carried out only from the StoreOnce CLI.
minimize the impact of deduplication, replication and housekeeping operations
competing for resources.
For further information please refer to the Installation and Configuration Guide and the
StoreOnce CLI commands must be run from an SSH terminal session and require an SSH
HP StoreOnce CLI Reference Guide on the CD.
• HP StoreOnce Backup Installation and Configuration Guide (PDF): This guide
client application (freely available from the internet) running on the management console.
describes how to install and carry out the initial configuration of your HP StoreOnce
See the HP StoreOnce CLI Reference Guide for more information.
Backup system.
• Linux and UNIX Configuration Guide (PDF): This guide contains information about
Accessing the Web or StoreOnce Management Console
configuring and using HP StoreOnce Backup systems with Linux and UNIX.
If DHCP is enabled on your network, simply connect to the Web Management Console
• StoreOnce Best Practices for VTL, NAS and Replication implementations and ISV
or StoreOnce CLI from any machine connected to the network using the default host
Impelementation Guides: These guides describe best practices and also include
5
name printed on the top of the appliance. Enter your user name and password.
examples using different backup applications.
Power On
Web: https:
You can find these documents from the Manuals page of the HP Business Support Center
1. Power on the HP StoreOnce Backup system (the power but on is on the front of the unit).
StoreOnce CLI: ssh
website: http://www.hp.com/support/manuals.
2. As long as DHCP is enabled on the network, the appliance should now be accessible
If DHCP is not enabled on your network, connect a console to the monitor and keyboard
In the Storage section, click Storage Solutions and then select your product.
across the network. If it is not enabled, you must use StoreOnce CLI commands to
configure the appliance on the network.
ports on the rear of the appliance and log in to the StoreOnce CLI to configure the
appliance on the network. See the HP StoreOnce Installation and Configuration Guide
for more information.
Front Panel
C
NOTE: If you will be configuring Virtual Tape Library devices as backup targets,
M
install all the required Tape drivers on backup servers and ensure the backup server
is running software that supports HP Tape libraries. Tape drivers can be found on the
Y
StoreOnce Backup CD. Drivers are not needed for NAS Share and Catalyst Store
CM
backup targets.
MY
1 Power button
CY
CMY
K
Power Off
Understanding the LEDs
To power off your HP StoreOnce Backup system always use the StoreOnce CLI commands,
as described in the HP StoreOnce CLI Reference Guide on the HP StoreOnce Backup CD.
NOTE: When installing/replacing a hot-plug device, it is not necessary to power
down the units.
6 Using the HP StoreOnce Backup system
User accounts and passwords
Item
Description
Status
Two types of user account are set up automatically when the system is installed:
1
HP beacon LED
Steady blue identifies the HP StoreOnce Backup
• Administrator: Allows authorized users to create and edit management and StoreOnce
system in the rack.
functions. They can also create and manage users. User name = Admin; password =
2
System health LED
Green = Normal operation
admin.
Flashing amber = Degraded condition
• Operator: Provides limited access for monitoring and viewing. User name = Operator;
Flashing red = Critical condition
password = operator.
3&4
Network port
Off = no network connection or network not
Names and passwords are case sensitive.
configured
Flashing green - network connection
Accessing the HP StoreOnce Backup system
5
Power but on LED
Off = no power connected
The Web Management Console is the main interface for:
Steady green = power connected, device ready for use
• Monitoring the status and health of the HP StoreOnce Backup system and all
Steady amber = device switched off or in hibernation
configured backup devices
with power connected
• Creating and modifying VTL and NAS StoreOnce backup targets and Catalyst stores
• Managing replication relationships and housekeeping