Войти:
Скачали: 1   Размер: 2 mb   Производитель: American Standard  
Категория: Термостаты
@name

Certified to comply with ANSI A112.18.1M ASSE 1016 ROUGHING-IN DIMENSIONS Recommended Tools Flat Blade Screwdriver Phillips Screwdriver Remove as much surface dirt and film using clear water and soft cotton cloth (as described above). Use any of the following to remove tough surface film and build-up: Mild liquid detergents Clear ammonia free liquid glass cleaners Non-acidic, non-abrasive gentle liquid or fully dissolved powder cleansers mixed according to manufacturers directions. Non-abrasive

Скачали: 4   Размер: 1 mb   Производитель: American Standard  
Категория: Термостаты
@name

Reinstall RED LOCKING DEVICE. KNOB MOUNT ARROW "A" BLACK ARROW CLAMP "B" RED LOCKING DEVICE SECURING RING 104 109 112 TEMPERATURE LIMIT STOP TOP CHECK STOP (HOT RED) PLUG TUB PORT CHECK STOP (COLD BLUE) COLD HOT 1 3 2 4 WOOD BRACE 5 6 If the CHECK STOPS (4, 5) were removed during installation, ensure the hot and cold CHECK STOPS (4, 5) are not reversed. The hot CHECK STOP (4) has a red top and the cold CHECK STOP (5) has a blue top. CHECK STOPS (4,5) are supplied in the open position. Closing us

Скачали: 3   Размер: 1 mb   Производитель: American Standard  
Категория: Термостаты
@name

Dry the faucet with a soft cotton cloth. DO NOT: Do not use any abrasive cleaners, cloths, or paper towels. Do not use any cleaning agents containing acids, polish abrasives, or harsh cleaners or soaps. Regular and routine cleaning will reduce the need for heavy cleaning and polishing. If heavy cleaning is required, the following procedures are recommended: CARE INSTRUCTIONS: Failure to follow these care instructions may damage the Faucet's finish. FINISHED WALL CL 100 TOP / OPEN 1 1 3 5 2 4 TEM

Скачали: 3   Размер: 1 mb   Производитель: American Standard  
Категория: Термостаты
@name

If heavy cleaning is required, the following procedures are recommended: CARE INSTRUCTIONS: Failure to follow these care instructions may damage the Faucet's finish. 3/4" CLASSIC THERMOSTAT TRIM KIT with SEPARATE VOLUME CONTROL C O L D HOT TEMP O F F ON TOP 1 Remove PLASTER GUARD (1). Remove HANDLE SCREW and ADAPTER (7) from rough valve. 1 Push CAPS (2 & 3) as shown onto CONTROL VALVES (4). TRIM INSTALLATION Push ESCUTCHEON (5) onto CAPS (2 & 3) and attach with (60mm) SCREWS (6) to valve. Push C

Скачали: 0   Размер: 852 kb   Производитель: American Standard  
Категория: Термостаты
@name

If so, please consult your American Standard dealer or service technician. During 7-Day Operation, you can set your thermostat for four periods (Wake, Leave, Return and Sleep) and up to eight temperatures (four Heat and four Cool) for each day of the week. Each day can be the same or different. System Fan Heat Auto AM M14586 During 7-Day Operation, one day of the week displays in program mode (Monday is shown in the example). 7-Day Preprogrammed Schedule If your thermostat is set for 7-Day Opera

Скачали: 5   Размер: 852 kb   Производитель: American Standard  
Категория: Термостаты
@name

Setting Temperature and Fan Operation If your thermostat is set for Constant Temperature Setpoint Programming, follow the steps below. Otherwise, refer to 7-Day Program and Operation, or 24-Hour Program and Operation. To set the temperature and fan operation: NOTE: Refer to the section Setting Current Day and Time to set the current day and time, and the section Setting System and Fan to set the system and fan. Pub. No. 12-5027-01 56 69-1615 1. Press Increase ^ or Decrease Ў until the desired te

Скачали: 0   Размер: 781 kb   Производитель: American Standard  
Категория: Термостаты
@name@name@name

Use any of the following to remove tough surface film and build-up: Mild liquid detergents Clear ammonia free liquid glass cleaners Non-acidic, non-abrasive gentle liquid or fully dissolved powder cleansers mixed according to manufacturers directions. Non-abrasive liquid polishers Once clean, rinse faucet again with clear water to thoroughly remove cleaner or polish and blot dry with a soft cotton cloth. To keep your new faucet looking new, please follow these simple care instructions: DO: Simpl

Скачали: 2   Размер: 710 kb   Производитель: American Standard  
Категория: Термостаты
@name@name@name

Certified to comply with ANSI A112.18.1M ASSE 1016 ROUGHING-IN DIMENSIONS Recommended Tools Flat Blade Screwdriver Phillips Screwdriver Remove as much surface dirt and film using clear water and soft cotton cloth (as described above). Use any of the following to remove tough surface film and build-up: Mild liquid detergents Clear ammonia free liquid glass cleaners Non-acidic, non-abrasive gentle liquid or fully dissolved powder cleansers mixed according to manufacturers directions. Non-abrasive

Скачали: 5   Размер: 681 kb   Производитель: American Standard  
Категория: Термостаты
@name

No. 12-5029-01 69-1617 TABLE OF CONTENTS CUSTOMIZING YOUR THERMOSTAT ............................................................................................................. 5 Program Options Set-Up by Your American Standard Dealer ....................................................................... 5-6 GETTING AROUND THE KEYBOARD ............................................................................................................. 7-8 Emergency Heat ..............................

Скачали: 7   Размер: 661 kb   Производитель: American Standard  
Категория: Термостаты
@name@name@name

Use any of the following to remove tough surface film and build-up: Mild liquid detergents Clear ammonia free liquid glass cleaners Non-acidic, non-abrasive gentle liquid or fully dissolved powder cleansers mixed according to manufacturers directions. Non-abrasive liquid polishers Once clean, rinse faucet again with clear water to thoroughly remove cleaner or polish and blot dry with a soft cotton cloth. To keep your new faucet looking new, please follow these simple care instructions: DO: Simpl





Категории