Display gram unit (of the weighing mode). PROG 1 0. 000g Select a Program Number to Edit the Measurement Program 2. Press the PROGRAM key and press the v or ^ key to select a program number. 3. Press the ENTER key to use the number. 4. The analyzer displays end and returns to the weighing mode. PROG "4Program number Caution If the data memory function is active, the data end memory number (MEM) is displayed in place of the PROG 4 0. 000g program number (PROG). MS-70 / MX-50 / MF-50 / ML-50 35 Se

When the halogen lamp has cooled down, the next measurement can be started. If necessary, change the drying time and temperature. When a measurement is started and the time passes one hour, the maximum temperature is automatically regulated to 160°C for safety. Operation to Stop Measurement During measurement, the STOP key is always effective. If there is an error or danger, press the STOP key. 2.3. After Use and Maintaining the Analyzer Put dust cover on the analyzer after it is cool. Clean the

PROG 2 0. 000g 6.3.2. Recalling a Measurement Program with a Program Number Stored measurement programs can be recalled with a program number. PROG "1 0 . 000g 1. Press and hold the PROGRAM key in the gram display. 2. Press the v or ^ key to select a program number PROG "2Program number 3. Press the ENTER key to use the selected number. MS-70 / MX-50 / MF-50 / ML-50 25 end PROG "2 0.000g 7. Measurement Programs 7.1. List of Measurement Programs 7. Measurement Programs 7.1. List of Measurement Pr

If the moisture content of the sample (example: plastic) can be estimated that is less than 1%, the mass of moisture is not enough for the measurement, when measuring light sample, the result may not be accurate. Consider the following sample mass for the measurement. An estimate of moisture content 1% 0.5% 0.1% Necessary mass for measurement 2 g at least 5 g at least 20 g at least If the measurement is repeated, maintain the same sample quantity. Crush grain samples to a small, uniform powder f