Войти:
Оценок - 4, средний балл: 4.5 ( )

Инструкция по эксплуатации Aprilaire, модель 8348

Производитель: Aprilaire
Размер: 444.82 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


For example, if the Water Panel Change Alert value is set to show the first alert in October, then a second alert will appear in January. An alert will not be displayed again until the next October, and the cycle repeats. Press the LIGHT button when the humidifier type value has been set. LIGHT ADJUST WATER PANEL WATER PANEL LIGHT ADJUST WATER PANEL WATER PANEL 9. Air Filter Change Indicator – Use this feature to remind the homeowner when an air filter change is needed. Use the ADJUST – Up and ADJUST – Down buttons to select the number of months between recommended filter changes. Use 1 or 3 for panel type filters and 6 or 12 for extended (pleated) media type filters. TABLE 1 lists general recommendations, refer to manufacturer literature for recommendations on the filter in your particular application. Set to 12 if the media is original Aprilaire High Efficiency Air Cleaner media. Set the value to “OFF” to disable this feature. Press the LIGHT button when the air filter indicator value has been set. “DONE” will appear on the display and the thermostat will reset. LIGHT ADJUST CHANGE FILTER CHANGE FILTER TABLE 1 Disable the feature OFF Disposable Panel 1 month 1 Washable Electrostatic 3 months 3 Extended Media (Aprilaire) 6-12 months 6 or 12 FILTER TYPE CHANGE FREQUENCY THERMOSTAT SETTING 10. Weekend Events – Use this feature to set the number of events for the weekend program. The default value is 4 events (The ENERGYSTAR® setting), which will result in the “LEAVE” and “RETURN” events to be used during programmed operation. If the owners schedule is such that the home or building is generally occupied during the weekends, switch to 2 events on the weekend. This will cause the “LEAVE” and “RETURN” events to be ignored during programmed operation. Press the ADJUST – Up or ADJUST – Down buttons to toggle between the two selections and press the LIGHT button when done. “DONE” will appear on the display and the thermostat will reset. LIGHT ADJUSTSA SU SLEEP WAKE RETURN SLEEP LEAVE WAKE SA SU Step10. Set the current time and day of the week (MODELS 8363, 8365 & 8366 ONLY) Press the CURRENT TIME button to access the clock. Use the ADJUST – Up and ADJUST – Down buttons to set the correct hour value. Make sure the correct AM/PM designator shows. CURRENT TIME [Advance Time] ADJUSTMO AM Make sure AM/PMis correct Press the CURRENT TIME button to enter the hours value and access the minutes value. Use the ADJUST – Up and ADJUST – Down buttons to set the correct value. CURRENT TIME [Advance Time] ADJUSTMO AM Adjust Minutes Press the CURRENT TIME button to enter the minutes value and access the “day of the week” value. Use the ADJUST – Up and ADJUST – Down buttons to set the current day of the week. CURRENT TIME [Advance Time] ADJUSTMO AM Adjust Day ofthe Week Press the CURRENT TIME button again to finish. The word “DONE” will appear on the display. CURRENT TIME [Advance Time] DONE As an ENERGYSTAR® partner, the thermostat (Models 8363, 8365 and 8366 only) has been pre-programmed with economical times and temperature settings. Refer to the Operating Instructions if the program is to be changed. P.O. BOX 1467 • MADISON, WI 53701-1467 Products For Better Indoor Air Quality. Form No. 5172 09.04 MAD...

Эта инструкция также подходит к моделям:
Термостаты - 8344 (444.82 kb)
Термостаты - 8363 (444.82 kb)
Термостаты - 8365 (444.82 kb)
Термостаты - 8366 (444.82 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории