Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
. The System Properties dialog box appears. * Depending on your system, the System icon may be shown directly in the Control Panel (Classic view). If so, double-click the System icon. 5. Click the Hardware tab, and then click [Driver Signing]. The Driver Signing Options dialog box appears. 6. In Driver Signing Options, restore the previous setting (“Warn” or “Block”) and click [OK]. 7. Click [OK]. The System Properties dialog box closes. Driver installation and settings (Windows) Driver installation and settings (Windows) Crackling may occur in the sound if you omit making this setting. To ensure that audio and MIDI are processed smoothly, make the setting as follows. 1 2 Open the System Properties dialog box. Depending on your system, the System icon may be 1. From the Windows start menu, choose Control Panel. displayed directly in the 2. In “Pick a category,” click “Performance and Control Panel (Classic view). If so, double-click the System Maintenance”. icon. 3. In “or Pick a Control Panel icon,” click the System icon. Click the Advanced tab. Click [Settings] located at the right of the Performance area. The Performance Options dialog box appears. Click the Advanced tab. In Processor Scheduling, choose “Background services,” and click [OK]. 3 4 5 6 In the System Properties dialog box, click [OK]. The System Properties dialog box closes. Next, you need to make audio device and MIDI device settings. (.“Driver settings” (p. 26)) ¦ Windows 2000 users ¦ Windows 2000 users 1 Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2 Open the System Properties dialog box. Click the Windows Start menu, and from the menu that appears, select Settings | Control Panel. In Control Panel, double-click the System icon. 3 Click the Hardware tab, and then click [Driver Signing]. The Driver Signing Options dialog box will appear. 4 Make sure that “File signature verification” is set to “Ignore”. If it is set to “Ignore”, simply click [OK]. If it is not set to “Ignore”, make a note of the current setting (“Warn” or “Block”). Then change the setting to “Ignore” and click [OK]. 5 Click [OK] to close the System Properties dialog box. 19 Driver installation and settings (Windows) Log on to Windows as a user with administrative privileges (such as Administrator) If you changed “File signature verification”, you must restore the previous setting after you have installed the driver. Driver installation and settings (Windows) Driver installation and settings (Windows) 6 Exit all currently running software (applications). Also close any open windows. If you are using virus checking or similar software, be sure to exit it as well. 7 Prepare the CD-ROM. Insert the CD-ROM into the CD-ROM drive of your computer. 8 Click the Windows Start menu. From the menu that appears, select “Run...” The “Run...” dialog box will appear. 9 In the dialog box that appears, input the following into the “Open” field, and click [OK]. (drive name) : \Driver\XP2k\SETUPINF.EXE * In the explanatory example shown here, the drive name is given as “D:”. The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive. The SetupInf dialog box will appear. You are now ready to install the driver. 10 Set the UA-20’s ADVANCE (mode select) switch to the ON position. 11 Use the USB cable to connect the UA-20 to your computer. To check the drive name In the Windows desktop, double-click the My Computer icon. In the window that appears, check the drive name of the CD-ROM drive into which you inserted the CDROM in step7. The drive name is the (D:) or (E:) displayed by the CD-ROM drive . This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the USB cable is required before the unit will operate normally. 21 Driver installation and settings (Windows) 12 The Insert Disk dialog box will appear. Click [OK]. 13 The Files Needed dialog box will appear. Input the following into the “Copy files from” field, and click [OK]. (drive name) : \DRIVER\XP_2k * Specify the drive name of your CD-ROM drive. 14 The screen will indicate “Completing the Found New Hardware Wizard”. Click [Finish]. 15 The System Settings Change dialog box will appear. Click [Yes]. Windows will restart automatically. If the “File signature verification” (Step 4) setting was not set to “Ignore”, a “Digital Signature Not Found” dialog box will appear. If “File signature verification” is set to “Warn” 1. Click [Yes]. 2. Continue the installation. If “File signature verification” is set to “Block” 1. Click [OK]. 2. When the “Found New Hardware Wizard” appears, click [Finish]. 3. Return to step 121 Driver installation and settings (Windows) 12 The Insert Disk dialog box will appear. Click [OK]. 13 The Files Needed dialog box will appear. Input the following into the “Copy files from” field, and click [OK]. (drive name) : \DRIVER\XP_2k * Specify the drive name of your CD-ROM drive. 14 The screen will indicate “Completin...