Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. From the File menu, choose FreeMIDI Preference. 2. Uncheck “Use OMS when available.” 3. Close FreeMIDI. 8. Select UM-3 from the FreeMIDI Setting folder you copied in step 4, and click [Open]. 9. Verify that MIDI transmission and reception occur correctly. From the MIDI menu, choose Check Connections. 10. The mouse cursor will change to the shape of a keyboard. Click the icon shown in the illustration. If the corresponding MIDI OUT indicator of the UM3EX blinks, the settings are correct. 11. Once again choose the MIDI menu command Check Connections to end the test. 12. From the File menu, choose Quit to exit FreeMIDI Setup. 38 Basic Use This chapter describes different basic methods of connecting the UM-3EX according to how the UM- 3EX is to be used. To transmit MIDI messages from a MIDI keyboard or digital piano to the sequencer software or make a MIDI recording of a keyboard performance or other performance using sequencer software on your computer, make the following connections and settings. fig.connect-in-e.eps_60 MIDI device setting In your sequencer software, select the MIDI device that corresponds to the connector to which you connected your MIDI keyboard or digital piano etc. THRU switch setting Turn the THRU switch off . MIDI messages from the MIDI device (e.g, MIDI keyboard, digital piano) connected to the UM-3EX’s MIDI IN connector are transmitted to the computer. * Don’t change the setting of the THRU switch while you’re using the UM-3EX. Doing so will cause MIDI errors. Basic Connections and MIDI Flow Transmitting MIDI messages from a MIDI keyboard or digital piano to the sequencer software MIDI messages are transmitted to the sequencer software. Connect to the computer’s USB connector. Connect to the MIDI OUT connector of the MIDI keyboard or digital piano. MIDI Keyboard Digital Piano MIDI Message Flow THRU OFF If you are experiencing duplicate notes (i.e., if your sound generating device plays two notes for each note it should play), turn Local Control OFF on your sound generating device, or turn the Thru function OFF in your sequencer software. For details on how to make these settings, refer to the owner’s manual for your equipment. 39 If transmitting MIDI messages from the sequencer software to a MIDI sound module or digital piano, or if using a MIDI sound module’s or digital piano’s sound generator to play the sounds from the playback of sequencer software on the computer, make the following connections and settings. fig.connect-out-e.eps_60 MIDI device setting In your sequencer software, select the MIDI device that corresponds to the connector to which you connected your MIDI keyboard or digital piano etc. * For details on settings for sequencer software that uses Windows standard device settings, refer to “Setting the Driver” (p. 21). THRU switch setting Turn the THRU switch off . MIDI messages from the computer are transmitted to the MIDI device (e.g., MIDI sound module, digital piano) connected to the UM-3EX’s MIDI OUT/THRU connector. * Don’t change the setting of the THRU switch while you’re using the UM-3EX. Doing so will cause MIDI errors. Transmitting MIDI Messages from the sequencer software to a MIDI sound module or digital piano MIDI Message Flow MIDI Sound Module Digital Piano MIDI messages are transmitted from the sequencer software. THRU OFF Connect to the computer’s USB connector. Connect to the MIDI IN connector of the MIDI sound module or digital piano. 40 If you want to play a MIDI keyboard and send MIDI messages to a MIDI sound module, make the connections and settings shown below. There is no need to connect the UM-3EX to a computer. fig.connect-thru-e.eps_60 MIDI device setting Since no computer is used, there is no need to make MIDI device settings. THRU switch setting Turn the THRU switch on . MIDI messages from the MIDI keyboard or digital piano connected to the UM-3EX’s MIDI IN connector will be sent to the MIDI sound module connected to the UM-3EX’s MIDI OUT/THRU connector. Even if the UM-3EX is connected to a computer, no MIDI messages will be sent to the computer. * Don’t change the setting of a THRU switch while playback is in progress. Doing so will cause MIDI errors. Transmitting MIDI messages from a MIDI Keyboard or other device to a MIDI sound module MIDI Message Flow Connect to the MIDI IN connector of the MIDI sound module. Connect to the MIDI OUT connector of the MIDI keyboard. THRU ON MIDI Sound Module MIDI Keyboard 41 ¦ ON/OFF Settings of the THRU Switches You can use the THRU switches to select the transmission destinations for MIDI messages from the devices (MIDI keyboard, digital piano, etc.) connected to the MIDI IN connectors. There is no need to change any cable connections. fig.thru-e.eps_60 * Don't change the setting of a THRU switch while playback is in progress. Doing so will cause MIDI errors. Switch Setting MIDI Message Destination Device OFF MIDI messages are transmitted to your computer (sequencer software). ON MIDI messages are trans...