Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
To AUDIO OUTPUT (L/R)To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) To VIDEO OUTPUT To COMPONENT VIDEO OUTPUT Terminals Video Equipment with Component video (Component Color) Output Terminals (Y, PB and PR) • To watch video material playback • Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play. • The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed. AIR INPUT 1 INPUT 2 INPUT 3 (COMPONENT) or (IN 1) (IN 2) (IN 3) CABLE Rear Front Rear • When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PB and PR terminals simultaneously, the COMPONENT terminal has priority over the VIDEO terminal. • INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest channel. Note: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • The S-Video terminal has priority over the VIDEO terminal (IN 1).When you wish to use video equipment connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cables/cords can be obtained from your local video store. 39 Using the Audio Output Terminals • These terminals are used for connecting an external audio amplifier. The STEREO/MONO/ SAP,VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on the TV itself.These terminals relay the audio signal of all programs being displayed on the TV screen. Stereo Amplifier Speaker System To the audio input terminals (AUDIO OUTPUT terminals are located on the rear of the cabinet.) CONNECTIONS (Rear connection terminals of TV) (1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level. (2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV. (3) Turn the TV set and stereo amplifier on. (4) If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO SELECT screen. See pages 13, 14. (5) Adjust the volume control on the stereo amplifier to a moderate listening level. (6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME, MUTE and FAO), from either the remote control, or directly from the TV set. Note: • For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used. • When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adaptor as shown below. • When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal sound quality. (see page 13.) Plug adapter To the equipment To the TV being connected Pin plug x 2 Pin Plug Pin jack/Mini plug Operation of Universal Remote Control Operation of Universal Remote Control Universal Remote Control With the purchase of your television set you also have received the latest innovation in remote control technology.With its easy-to-use push button keyboard, your Remote can control your television set and most infrared remote controlled VCRs, cable TV converters and DVDs as well. Note: • Depending on the model year produced, brand and type of VCR, cable TV converter and DVD, some models may not be compatible with the remote control. • Some brands may not enable channel selection until the ENTER is pressed. In such case, try the following. Example: When you select channel 24, (1) Press REMOTE KEYPAD “2”. (2) Press REMOTE KEYPAD “4”. (3) Press ENTER. For detailed information on the use of the Cable TV converter Box refer to their operating manuals. • Using your Remote with your TV After installing the batteries, set the CATV/ DVD-TV/VCR on the Remote to the TV position. (If you can change the channel of the TV by pressing CH a/s on the Remote Control, it is in the TV position.) • “Identifying” VCRs, cable TV converters and DVDs Your Remote Control has been set at the factory to operate your TV and many remote controlled VCRs, cable TV converters and DVDs. However, in some cases an easy onetime set-up step may be necessary before the Remote will operate accessory VCRs, cable TV converters and DVDs. • In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR, cable TV converters and DVDs. • Once “identified”, the Remote sends proper signals to operate your accessory. • This identifying step will not have to be repeated until power to the Remote is interrupted due to a battery failure. • Using your remote control with a VCR Once you make certain the Remote Control has “identified” ...