Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-46W5830 (11.98 mb)
Телевизоры - KDL-46W5830 (11.97 mb)
Телевизоры - KDL-46W5830 (12.52 mb)
Фрагмент инструкции
become disconnected. Check Settings • Check if the “Renderer Function” is activated. • Check that the connected device is registered under “Renderer Access Control”. Only a few icons appear under • This is normal when internet connection is not available. the "Network" in the Home You can use three pre-installed Widgets properly. To enjoy more Menu. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) Additional You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/ modem settings. General Auto Setup (freesat) is • Check connections and dish alignment. The dish needs to be pointing at stopped before it is completed. Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East. • If the problem persists, consult your freesat registered retailer or call Freesat (UK) Ltd on 0844 881 6700 or visit Some programmes cannot be • Check the aerial or dish. tuned. • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On / Off switch, and turn it On again. • The frequency you entered is out of range. Please consult the received satellite broadcasting company. Distorted picture and/or • Keep the TV away from electrical noise sources such as cars, sound. motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. 25 GB Condition Explanation/Solution The TV turns off • Check if the “Sleep Timer” is activated, or confirm the “Duration” automatically (the TV enters setting of “On Timer”. standby mode). • Check if the “Idle TV Standby” is activated. • If no signal is received and no operation is performed in the TV mode for 30 minutes, the TV automatically switches to standby mode. The TV turns on • Check if the “On Timer” is activated. automatically. Some input sources cannot be • Select “AV Preset” and cancel the “Skip” setting for the input source. selected. The remote does not function. • Replace the batteries. HDMI equipment does not • Check that your equipment is compatible with Control for HDMI. appear on “HDMI Device List”. You cannot select “Off” in • If you have connected any audio system that is compatible with Control “Control for HDMI”. for HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” ...
Эта инструкция также подходит к моделям:Телевизоры - KDL-46V5800 (683.97 kb)
Телевизоры - KDL-46V5810 (683.96 kb)
Телевизоры - KDL-52V5800 (683.96 kb)
Телевизоры - KDL-52V5810 (683.96 kb)