Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If this happens, go content differs from content back up one level and try opening the folder or server again. on the server. Photo, music and/or video files do not appear or icons are not displayed. Preliminary Check • Check that the connected device supports DLNA. • Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question. • Turn the connected device on. Check Connections • Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected. Check Settings • Check that the connected device is registered under “Server Display Settings”. • Check that the server is correctly configured. • Check that the selected device is connected to the network and can be accessed. • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics”. The TV cannot be found from Check Connections renderer-compatible device • Check that the LAN cable and/or mains lead of the server has not (the controller). become disconnected. Check Settings • Check if the “Renderer Function” is activated. • Check that the connected device is registered under “Renderer Access Control”. Only a few icons appear under • This is normal when internet connection is not available. the "Network" in the Home You can use three pre-installed Widgets properly. To enjoy more Menu. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) Additional You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/ modem settings. General Auto Setup (freesat) is • Check connections and dish alignment. The dish needs to be pointing at stopped before it is completed. Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East. • If the problem persists, consult your freesat registered retailer or call Freesat (UK) Ltd on 0844 881 6700 or visit Some programmes cannot be • Check the aerial or dish. tuned. • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On / Off switch, and turn it On again. • The frequency you entered is out of range. Please consult the received satellite broadcasting company. Distorted picture and/or • Keep the TV away from electrical noise sources such as cars, sound. motorcycles, hair-dryers or optical equipment. • Whe...
Эта инструкция также подходит к моделям:Телевизоры - KDL-46V5810 (683.96 kb)
Телевизоры - KDL-52V5800 (683.96 kb)
Телевизоры - KDL-52V5810 (683.96 kb)
Телевизоры - KDL-37V5800 (683.96 kb)