Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-37W5840 (11.98 mb)
Телевизоры - KDL-37W5840 (11.97 mb)
Телевизоры - KDL-37W5840 (12.52 mb)
Фрагмент инструкции
Execute “Server Diagnostics”. The TV cannot be found from Check Connections renderer-compatible device • Check that the LAN cable and/or mains lead of the server has not (the controller). become disconnected. Check Settings • Check if the “Renderer Function” is activated. • Check that the connected device is registered under “Renderer Access Control”. Only a few icons appear under • This is normal when internet connection is not available. the "Network" in the Home You can use three pre-installed Widgets properly. To enjoy more Menu. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) Additional You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/ modem settings. General Auto Setup (freesat) is • Check connections and dish alignment. The dish needs to be pointing at stopped before it is completed. Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East. • If the problem persists, consult your freesat registered retailer or call Freesat (UK) Ltd on 0844 881 6700 or visit Some programmes cannot be • Check the aerial or dish. tuned. • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On / Off switch, and turn it On again. • The frequency you entered is out of range. Please consult the received satellite broadcasting company. Distorted picture and/or • Keep the TV away from electrical noise sources such as cars, sound. motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. 25 GB Condition Explanation/Solution The TV turns off • Check if the “Sleep Timer” is activated, or confirm the “Duration” automatically (the TV enters setting of “On Timer”. standby mode). • Check if the “Idle TV Standby” is activated. • If no signal is received and no operation is performed in the TV mode for 30 minutes, the TV automatically switches to standby mode. The TV turns on • Check if the “On Timer” is activated. automatically. Some input sources cannot be • Select “AV Preset” and cancel the “Skip” setting for the input source. selected. The remote does not function. • Replace the batteries. HDMI equipment does not • Check that your equipment is compatible with Control for HDMI. appear on “HDMI Device List”. You cannot select “Off” in • If you have connected any aud...
Эта инструкция также подходит к моделям:Телевизоры - KDL-46V5800 (683.97 kb)
Телевизоры - KDL-46V5810 (683.96 kb)
Телевизоры - KDL-52V5800 (683.96 kb)
Телевизоры - KDL-52V5810 (683.96 kb)