Оценок - 3, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Æ order in which the channels apprai- on the screen. Connect the TV plug to the mains socket (220-240 VAC, 50Hz). Press ® On/Off button on the TV set to switch on the TV. 7 No channel found Please connect aeria OK Confirm [t] End [menu] Selecting the language of the menu screens This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu sceens. The first time that you switch on your TV, the Language menu displays automatically on the TV screen. Press 2 +/- button on the top control panel to select the language, then press t to confirm your selection. From now on all menus will appear in the selected language. Ensure the aerial is connected as instructed, then press t to confirm. The TV automatically starts searching and storing all available broadcast channels for you. HThis procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. №■ If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (refer step 3 or 4) and press t. The auto tuning process will start again. When auto tuning process is finished, the Program Sorting menu appears on the screen. a) If you wish to keep the broadcast channels in the tuned order: Programme Sorting Programme: ffi 01 TVE 02 TVE2 03 TV3 ® 04 C33 D Select channel Select [-2+] Confirm [t] Exit [menu] Press the MENU button to exit. Programme Sorting Programme: ffl 01 TVE 02 TVE2 03 TV3 ® 04 C33 D Select channel Select [-2+] Confirm [t] Exit [menu] b) If you wish to store the broadcast channels in a different order: 1 Press 2 +/- to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press t. 2 Press 2 +/- to select the new programme number position for your selected channel (TV Broadcast), then press t. 3 Repeat steps 1 and 2 if you wish to change the order of the other channels. Programme Sorting Programme: ffi 01 TVE 02 TVE2 03 TV3 04 C33 a 03 TV3 Select new position Select [ -2+] Confirm [t] Exit [menu] Correcting the Picture Slant (only for KV-21CT1U) Because of the earth's magnetism, the picture might slant. By following the instructions below, you can correct the picture slant if it is necessary. Picture Rotation [-2]J| II [2+] Select [-2+] Confirm [t] End [menu] a) If it is not necessary, press t. b) If it is necessary, press 2 +/- to correct any slant of the picture. Finally press t to store. I • To allow this menu to appear again, press and hold MENU button at top control panel for about 5 seconds. • The MENU,g and ♦/♦/♦/♦ buttons on the remote control can also be used for the operations above. Your TV is now readyfor use. Auto Tuning Your television stations are now stored in your television's memory....
Эта инструкция также подходит к моделям:Телевизоры - KV-14CT1U (367.3 kb)