Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Connect the Aerial to your TV. Select the language of the menu screens. Tune your TV. Change the Programme order of the Broadcast channels. Adjust the picture slant. (only for KV-21CT1U) View TV Programmes. FD Trinitron Colour Television 4-095-l26-02 (l) Checking the Accessories Supplied P @±)© i/сЛ OoO a/в CD -Э © О CD CD CD © © © © © © © © © © © О PROG CDff+№ 0® О © 00 © MENU 0^0 <5? Ô oooo SONY f TV ) 1 Remote Control RM-W100 1 Loop aerial (only for KV-14CT1U) Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Connecting an Indoor Aerial (only for KV-14CT1U) For a better reception we recommend you connect an external aerial. However, where an external aerial is not available and your local UHF signal is strong, you can connect the supplied loop aerial as follows: 1 Insert the loop aerial into the opening on top of the set until it clicks. 2 Connect the aerial connector to the aerial socket on the rear of the set. 3 After switching on the TV, adjust the aerial for optimum reception. Connecting an Outdoor Aerial and VCR / Connecting cables are not supplied. -mu ©2003 Sony Corporation Printed in Spain Ecological Paper - Totally Chlorine Free Scart lead is optional. The Scart lead is optional. If you use a Scart lead, it can improve the picture and sound quality when using a VCR. If you do not have a Scart lead, tune in the VCR test signal to the TV programme number "0" by using the "Manual Programme Preset" option (for details on how to manually programme these presets, see page 14, step a) of the instruction manual). Refer to your VCR instruction manual to find out how to find the output channel of your VCR. Switching on the TV Automatically Tune Changing the Programme Order the TV of the Broadcast channels You need to tune the TV to receive channels (TV Broadcast). Æ ^ c 11 • ^ u i By following the instructions below, this TV automatically Æ Byfollornng to instractions telo^ you can rearrange the searches and stores all available broadcast channels for you. Æ order in which the channels apprai- on the screen. Connect the TV plug to the mains socket (220-240 VAC, 50Hz). Press ® On/Off button on the TV set to switch on the TV. 7 No channel found Please connect aeria OK Confirm [t] End [menu] Selecting the language of the menu screens This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu sceens. The first time that you switch on your TV, the Language menu displays automatically on the TV screen. Press 2 +/- button on the top control panel to select the language, then press t to confirm your selection. From now on all menus will appear in the selected language. Ensure the aerial is connected as instructed, then press t to confirm. The TV automatically starts searching and stor...
Эта инструкция также подходит к моделям:Телевизоры - KV-21CT1U (367.28 kb)