Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 3.32 mb Название файла: Язык инструкции:

Connect a cable receiver box/satellite set-top box through component video input or HDMI HDMI 1 HDMI 2 PC IN AUDIO IN VGA 75 Cable Receiver Box OR OR ANTENNA SATELLITE CABLE HDMI 1 HDMI 2 PC IN AUDIO IN VGA 75 SATELLITE HDMI 1 HDMI 2 PC IN AUDIO IN VGA 75 HDMI 1 HDMI 2 PC IN AUDIO IN VGA 75 OR Cable Receiver Box OR CABLE EN-10 ESPANOL FRANCAISE ENGLISH 4.5 Connect the AC power cord BBWarning Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. To connect the AC power cord CABLE SATELLITE CABLE 1. Locate the power connector at the back of the TV. The location of the power connector varies according to TV model. 2. Insert the AC power cord fully into the TV power connector. 3. Connect the AC power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends. 4.6 Manage cables Route your AC power cord, antenna cable and all other device cables through the cable holder at the back of the TV. The holder helps keep your cables tidy and easily manageable. HDMI 1 HDMI 2 PC IN AUDIO IN VGA 75 4.7 Switch on the TV Before you switch on the TV, check that the mains cord is properly connected. Press POWER button at the side of the TV, or press power button on the remote control. The TV normally takes 10-15 seconds to start up and the following screen appears the first time you turn on the TV. Thank you for your purchase of this TV. Please proceed with the following steps to set-up your TV. For the BEST possible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area. Next Press the GREEN Next button on your remote to proceed. Follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 10 minutes. DDNote If you connect your TV to a cable receiver box or satellite set-top box, you do not need to install channels. Press the red button on the remote control to exit the channel installation stage of the setup. EN-11 ESPANOL FRANCAISE ENGLISH 5. Use your TV This section helps you perform basic TV operations. 5.1 Switch your TV on or to standby To Switch the TV on • If the standby indicator is off, press . POWER at the side of the TV. • If the standby indicator is on, press . on the remote control. CHANNEL MENU VOLUME POWER POWER CHANNEL MENU VOLUME POWER POWER To Switch to standby • Press . on the remote control. To switch on from standby without the remote control. • Press . POWER at the side of the TV to switch the TV off. • Press . POWER again to switch the TV on. DDNote The TV is never powered off completely unless it is physically unplugged. 5.2 Watch TV Switch channels • Press a number (1 to 999) or press CH +/- on your remote control. • Press PREV CH to return to the previously viewed TV channel. DDNote You can also switch channels by pressing CHANNEL +/- at the side of the TV. Adjust volume • Press VOL+/- on your remote control. • Press MUTE on your remote control to mute the sound. Press MUTE again or press VOL+/- to restore the sound. DDNote You can also switch volume by pressing VOLUME +/- at the side of the TV. ENGLISH 5.3 Watch channels from a cable receiver box 1. Switch on the cable receiver box. The picture from your cable receiver box might appear automatically on your screen. 2. Use the remote control of your cable receiver box to select channels. If the picture does not appear 1. Press SOURCE repeatedly to select the connected cable receiver box and wait a few seconds for the picture to appear. 2. Press OK. 3. Use the remote control of your cable receiver box to select channels. 5.4 Watch a DVD 1. Insert a DVD disc in your player. 2. Press Play > on the remote control of your player. The picture from the player might appear automatically on your screen. If the picture does not appear 1. Press SOURCE repeatedly to select the correct source and wait a few seconds for the picture to appear. 2. Press OK. EN-12 6. Use more of your TV This section describes the advanced features of your TV. 6.1 Remote control overview 1234567891011121314151617181920 1. . POWER Switches the TV on from standby or back to standby. 2. SOURCE Selects connected devices. 3. SLEEP Sets the TV to turn itself off within a certain time. 4. CLOCK See Set the clock section. 5. To add or remove a channel in the favorite channels list of the TV. 6. FORMAT Selects a picture format. See Change Picture format section. 7. CURSOR BUTTONS I i I . To navigate through the menus. 8. INFO Displays programme information, if available. 9. CH +/Switches to the next or previous channel. 10. NUMBER BUTTONS Selects a channel, page or setting. 11. DOT Uses the dot for digital channels. 12. PREVIOUS CHANNEL Returns to the previously-viewed channel. 13. VOL +/Increases or decreases volume. 14. MUTE Mutes or restores sound. 15. MENU Toggles the menu on or off. 16. OK -To activates a setting. -To display the lis...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: