Оценок - 4, средний балл: 3.5 ( )

Производитель: Mitsubishi Electronics Размер: 2.67 mb Название файла: Язык инструкции:

See also the troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input. Reset Name When to Use How to Use Resulting Action Format When the picture shape seems incorrect, use FORMAT to change the shape of the picture. Press the FORMAT key to cycle through the available formats to find the best format for the current picture. The last-used format for a signal type is memorized for each input. The next time the same input and the same signal type is viewed, the last-used format will be recalled. PerfectColor™ When the color intensities While viewing the input to be reset, 1. All PerfectColor/PerfecTint sliders and PerfecTint™ seem out of balance, press MENU to display the Main are reset to the original center Reset use the PerfectColor/ menu with the A/V icon highlighted. position. The PefectColor/PerfecTint (for the single input currently being watched) PerfecTint reset to reset the color balances to the original factory settings. Both PerfectColor and PerfecTint and are reset at the same time. Use 2. to highlight PerfectColor and press ENTER to display the PerfectColor adjustment screen. Press 3. CANCEL to reset the colors. settings for other inputs remain unchanged. A/V Memory When audio and/or video While viewing the input to be reset, 1. All Audio and Video settings for the Reset settings for a single input press MENU to display the Main individual input are reset except (for the single seem incorrect, use A/V menu with the A/V icon highlighted. for the Listen To, Language, audio input currently being watched) Memory Reset to return the input to the original factory settings. Use 2. to highlight the Reset icon and press ENTER to reset. Balance, and Closed Caption settings. A/V Reset To reset audio and video While viewing the TV, press the control-All Audio and Video settings are (for all inputs) adjustments for all inputs panel buttons GUIDE and FORMAT at the returned to the original factory to the original factory same time. settings, including Listen To and settings. Language, plus Closed Captions settings and Format settings. Channel To erase and While viewing the TV, press 1. MENU to All previously memorized chan- Memorization re-memorize channels on ANT 1 or ANT 2. display the Main menu. Press 2. to highlight the Setup icon. Press 3. to highlight the Scan icon. Press 4. to highlight the antenna input and reception mode, e.g. Ant 1 Air. Press 5. to highlight the Start button icon and press ENTER to start the memorization. nels for the selected antenna input are erased and a new set of memorized channels is created. All custom settings for Fav, channel names, and channel locks are deleted. To add or delete individual channels, see Edit menu instructions on page 43. Lock Menu Pass Code To change your Lock menu pass code See the cutout page in Appendix B, page 63. Allows a new code to be established. Control-Panel To re-enable the control-Press and hold the MENU button Allows the control panel to be Lock Release panel buttons after activation of the Control- Panel Lock on the control panel for over eight seconds. This works even if the TV is powered off. unlocked if the remote control is misplaced. 74 Appendices Appendices 75 Appendix D: Troubleshooting, continued Appendix D: Troubleshooting, continued Appendices 75 Appendix D: Troubleshooting, continued Appendix D: Troubleshooting, continued Reset Name When to Use How to Use Resulting Action System Reset If the TV does not turn on or off, does not respond to the remote control or control-panel buttons, or has audio but no video. Press the SYSTEM RESET button on the control panel. The TV will turn off and the green LED will flash quickly for about one minute. When the green LED stops flashing, you may turn on the TV. The changes you made most recently, before using SYSTEM RESET, may be lost. Changes you made previously, however, are not lost. TV Reset To reset all consumer-While viewing the TV, press 1. MENU to The TV will start the initialization IMPORTANT: accessible settings display the TV Main menu. process. The TV will then turn off Use this reset only if all other resets have been unsuccessful. and all memories to the original factory defaults. CAUTION: All owner- performed setups and adjustments will be erased. With the 2. Main menu displayed, press number keys 1 2 3 to display the Reset menu. READ THE ON-SCREEN 3. WARNING AND INSTRUCTIONS. If you do not wish to use this • and the front green LED will start flashing. When the LED stops flashing, ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: