Оценок - 4, средний балл: 4
(
)
)
|
Фото и характеристики Runco VX-2c |
Фрагмент инструкции
The VX-2c is among the first DLP™ projectors to offer a 16:9 native resolution, 3-chip system for home theater. The VX-2c optical light engine utilizes three of Texas Instruments’ advanced HD-2 DMD’s™ featuring 1280 x 720 high definition resolution and 12 degree mirror tilt for the finest black level performance. Unlike previous single- chip implementations of the HD-2, no color wheel is required in a 3-chip system, reducing mechanical complexity and compromises to color spectrum purity. The VX-2c is also Runco’s smallest 3-chip chassis ever, easily fitting where many 3-chip projectors have not gone before, enhanced further by horizontal and vertical lens shift for maximum installation flexibility even in the most difficult situations. The impressive brightness inherent in 3-chip systems is further bolstered by the improved contrast capabilities of the HD-2 chip design, offering the best of both worlds. The VX-2c is provided with Runco’s next generation, all digital DHD Video Controller for unprecedented video processing, scaling and aspect ratio control. The VX-2c package represents a new level of performance and value in 3-chip projection systems and is feature- filled for both ease of operation and custom installation sophistication. » The features you’ll enjoy include: • Native Resolution: 1280 x 720 • 3-Chip System with 16:9 Native Aspect Ratio • DVI Input with HDCP • HDTV Ready • Multiple Lens Options for Throw Distance Flexibility • Next Generation All Digital DHD Video Controller Contents of the package: • 3-Chip Projection System • (2) AC Power cords (projector/controller) • (1) 16.5’ DVI cable • (1) DHD remote control with (2) AAA batteries • (1) 3mm Hex Driver • (1) User’s manual • (1) DHD bracket • (1) Warranty information and registration card Options: • Ceiling mount unit • Tilt mount unit 2 WARNINGS & SAFETY PRECAUTIONS WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT REMOVE COVER. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light. WARNING The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the power (OFF) button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE. PRODUCT DISPOSAL This projector utilizes tin-lead solder, high intensity discharge lamp (HID lamp) containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, if you are located in the United States of America, the Electronic Industries Alliance: INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 3 WARNINGS & SAFETY PRECAUTIONS DECLARATION OF CONFORMITY RUNCO PROJECTOR, MODEL VX-2c This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must acce...