Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
• Check if all parts ( Parts) have been included. • Before using your grill for the first time, clean it thoroughly ( Cleaning). NOTE: The first time you use your table grill, it may emit a slight odor and smoke. This is normal and not a malfunction. Assembly • Place the table grill on a clean and flat surface. • Put the drip tray (14) with the higher edge to the back into the frame (15). • Put the cooking plate (12/13) on the frame (15) above the drip tray (14). • Insert the temperature control probe (7) with control knob (9) facing up into the socket (5) of the plate on the right side. Insert the plug (11) into power outlet. NOTE: Do not press the release lever while inserting the temperature control probe into the socket. Using the table grill • Apply a little vegetable oil on the ........p.....cooking plate (12/13). We recommend the use of a good quality oil to enhance the flavor of your food. • ............p.....................Turn the temperature control knob (9) to the desired temperature level: Temperature range Setting Function less than 300°F / 150..°C low keep warm 300 - 350°F / 150 - 175..°C medium slow cooking; fish, bacon 350 - 400°F / 175 - 205..°C high marinated meats, teriyaki, pancakes 400 - 450°F / 205 - 230..°C max sear meats, preheat • ..The power-on indicator light (8) will illuminate blue to show power is on. Depending on the selected temperature, .................................................it might take a few minutes to reach the desired cooking temperature. When the thermostat has reached the desired temperature, 2 1 Assembly & use the indicator light (8) will go off. The grill is now ready to use. ..............p............Before using, preheat unit until the indicator light (8) goes off. The cooking plate (12/13) has a non-stick surface and is divided in two parts: • The .......griddle (13) side has a smooth surface and is perfect for bacon, eggs, pancakes, french toast, and toasted sandwiches. • The .....grill (12) side has a ribbed surface and is intended for grilling steaks, hamburgers, chicken, seafood, and vegetables. • Use a wooden spatula. Do not use sharp or plastic utensils to place food on the cooking plate or to remove food as these can damage the non-stick surface of the cooking plate. • You may vary the setting of the control knob (9) at any time during operation. • The indicator light (8) will continue to go on and off as the temperature is adjusted during operation. CAUTION: The handles will get hot during use. Do not remove the cooking plate (12/13) from the frame. Allow the appliance to cool for at least 30 minutes before handling. Use the frame (15) to carry or move the unit. When doing so, do not use the handle of the glass cover (1) or that of the cooking plate (4). WARNING: This appliance generates heat and steam during use. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or damage to property. • When you are finished, turn the temperature control knob (9) to the OFF position and the indicator light (8) will go off. • Unplug the table grill from the wall outlet and press lever (10) to remove the temperature control probe (7). Cleaning CAUTION: Before cleaning, unplug the table grill to prevent electric shock and let the table grill cool down completely. Clean the table grill after every use. Do not use chemicals, abrasive cleaners, steel wool, or scouring pads. The non-stick surface or glass cover may become damaged or scratched. There are no user serviceable parts. 1 2 Cleaning • Turn the temperature control knob (9) to the position OFF. • Unplug the table grill from the wall outlet and press lever (10) to remove the temperature control probe (7). • Remove cover (3), cooking plate (12/13), and drip tray (14). • Clean cooking plate (12/13) with a soft sponge and warm water. • Clean cover (3), frame (15), and drip tray (14) with dishwashing detergent and a soft sponge. • Dry cooking plate (12/13), drip tray (14) and frame (15), and reassemble. The inner part of the socket must be completely dry before reinserting the temperature control probe. To dry the socket, wipe its inner part with a dry cloth. If necessary, shake out excess water first. Troubleshooting Problem Solution Table grill is not working. Check power connection. Check if the temperature control probe (7) is correctly inserted in the socket (5). Table grill emits smoke. Check if there is food stuck in the table grill. If additional assistance is needed, please contact Customer Assistance at 1.877.207.0923 (U.S.) or 1.877.556.0973 (Canada). Technical data Rated voltage: 120V ~60Hz Rated current: 12.5A Rated power input: 1500W Customer Assistance If you have a claim under this warranty, please call our Customer Assistance Number. For faster service, please have the model number and product name ready for the operator to assist you. This number can be found on the bottom of your appliance and on the front page of this manual. Model Number: ______...
Эта инструкция также подходит к моделям:Грили - 681131691109 (447.63 kb)