Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
If the channel you are watching is in Nicam stereo the On Screen Display will show NICAM STEREO for a while. Please Note If, while watching a nicam stereo channel, the signal strength drops and the system cannot receive nicam stereo the OSD will show MONO. If the signal strength increases again and nicam stereo can be received again, the OSD will show NICAM STEREO. Note: If you have selected mono the TV will default to nicam stereo next time you switch it on or change program. Sound mode You can select NORMAL, SPATIAL or DOLBY VIRTUAL (*) using the Volume up/down buttons or mix button. SPATIAL sound is an ‘expanded stereo’. It gives the impression that the two speakers in the TV are further apart than they really are. DOLBY VIRTUAL (*) is based on Dolby Pro Logic decoding for production of the Left, Right, Centre and Virtual Surround Sound channels using two loudspeaker. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Please Note To get the surround effects in Dolby Virtual mode, you must apply a Dolby Surround encoded input to the TV. You can’t adjust the AVL and EQUALIZER in DOLBY VIRTUAL mode.You can’t adjust the AVL and EQUALIZER in DOLBY VIRTUAL mode. To save your settings, select STORE and press theOK button. STORED will be displayed. Press the Menu button to go back to the previous menu. AVL TV transmitters have different sound levels. AVL (automatic volume limiting) maintains the same sound level as you switch from program to program. To adjust this press Volume up or down button and select ON or OFF AVL. To save your settings, select STORE and press theOK button. STORED will be displayed. Press the Menu button to go back to the previous menu. (*) Model Dependant) Dynamic Bass (optional) Set DYNAMIC BASS to ON if you wish to deepen the bass sound specifically. 13 Equalizer In this menu are a series of preset equalizer settings for different types of sound output. There are five music settings - MUSIC, SPORTS, CINEMA, SPEECH and USER Press the OK button to enter the EQUALIZER menu. Program downbutton to select USER. Press OK button. Use the Volume up button to select the KHz column you want to change. Use the Program up/down buttons to make the changes. To save your settings, press the OK button. Press the Menu button to go back to the previous menu. 14 mode. USER allows you to set your own sound output in the sound Menu: Use the You can change the equalizer setting whilst watching the TV using the MUSIC SPORTS CINEMA SPEECH USER 0.1 0.5 1.5 5 10 EQUALIZER BACK sound Smart control. Press the sound Smart control to page through the different equalizer settings and select the one you want. Once you have switched the TV off the equalizer setting will revert to the user setting. Headphones Headphone socket location (see page 6). Insert headphones with A 3-5mm plug into the TV headphone socket. The same menu adjustments can be made with the headphones as with the TV speakers. To make headphone sound adjusments press the mute button the mute symbol will stay on until the mute button is pressed again. To return to the TV speaker sound press the mute button and the mute symbol will disappear. Note: If you have used the headphones with high volume it is advisable to reduce it before pressing mute to avo›d a loud changeover to TV sound. Picture menu (Green button) BRIGHTNESS CONTRAST COLOUR SHARPNESS COLOUR TEMPERATURE STORE PICTURE NORMAL BACK The picture menu allows you to set up the following: BRIGHTNESS CONTRAST COLOUR SHARPNESS COLOUR TEMPERATURE To change, for example, the colour, select it using Program buttons. Use the Volume up and Volume down buttons to change the setting. To save your settings, select STORE and press the OK button. STORED will be displayed. Note: The settings you have stored are the ones that will be selected when you select user with the picture smart control (see page 15). Smart cont. This gives you a choice of picture type: SOFT, NATURAL, RICH or USER. Use the button to change this type. USER allows you to set your own picture type (see picture menu page 14) You can change the picture type whilst watching the TV using the picture Smart control. Press the picture Smart control to page through the different picture types and select the one you want. Once you have switched the TV off the picture type will revert to the user stored setting. Features Menu (Purple button) Press the purple button on the remote control to enter the features menu LANGUAGE TIMER FEATURES BACK OK SELECT Language There are many languages available for the On Screen Displays (OSD). Press the OK button to select the language list. Press the Program down button to page through all the languages and OK to select. Note: Only the O.S.D. language will change. Timer: Use Program up and down buttons to select Timer in the features menu. Using the Timer fuction, you can switch to a specific programme at a pre- programmed time or you...