3.2 Tool Safety Air-powered tackers shall only be operated and serviced by persons having been instructed in the operation of such tools. Keep out of the reach of children. Before every use check to see that all safety and triggering devices are functioning properly. Also check the tightness of all screws and nuts. The tool must not be modified, nor shall any emergency repairs or conversion be made. Avoid damage or weakening of the tool. Never dismount or disable parts such as the tool’s trigger

b) by line oiler A line oiler is installed on the tool’s air inlet, which provides the necessary oil for lubrication. c) manual lubrication If neither a service unit nor a line oiler exists in the pressurised air system, 3 -5 drops of pneumatic oil must be given into the air inlet before each use. . Store air tools in dry rooms only. 10 5.2 Trouble shooting Trouble shooting Faults and possible causes Remedy A. Air escapes between lid and housing: O-rings damages or soiled Clean or replace O-ring