No. No. Used Description No. No. Used Description 1 * * * 4 HEX. SOCKET HEAD BOLT M5X25 53 213028-1 1 O RING 2 2 414957-3 1 COVER 54 213028-1 1 O RING 2 3 415235-4 1 MUFFLER 55 322380-7 1 TRIGGER VALVE CASE 4 258018-7 2 SPRING PIN 2.5-9 56 * 1 IDLER * * * 1 TOP CAP COMPLETE 57 * 1 TRIGGER 6 261093-4 1 URETHANE WASHER 32 58 262054-7 1 URETHANE RING 3 7 421399-4 1 CUSHION R 59 310098-2 1 FEEDING CLAW 8 213416-2 1 O RING 26 60 231603-1 1 TORSION SPRING 6 9 213462-5 1 O RING 33 61 256432-1 1 PIN 4-4

MEDIUM & WIDE CROWN STAPLERS EFFICIENCYEFFICIENCY Quick release cam-lock opens guide assembly to easily clear jammed staples, minimizing downtime Built-in air filter minimizes dust and debris, prolonging life and minimizing maintenance ACCURACY Depth drive adjustment allows user to drive staples to the precise level on the surface CONVENIENCE Hook allows tool to remain close-by but never in the way MEDIUM & WIDE CROWN STAPLERS FEATURE LIGHTWEIGHT DESIGN FOR COMFORT AND CONTROL Top-Loading Magazi

(L x W x H) 14-1/2" x 3-7/16" x 11-3/8" 14-1/2" x 3" x 10-1/4" Net Weight 4.9 lbs. 5.1 lbs. Shipping Weight 6.8 lbs. 7.0 lbs. UPC Code 088381-07749-1 088381-07750-7 Makita offers a wide variety of accessories for Pneumatic Staplers. For a complete listing, please refer to the Makita General Catalog, or visit makitatools.com, or call 1-800-4MAKITA. All specifications subject to change without prior notice. All models and accessories subject to stock on hand. SNTF-0307 4M MA-0212-07 For more infor

Select a compressor that has ample pressure and air output to assure cost-efficient operation. The graph shows the relation between nailing frequency and compressor air output at a compression of 8.5 kgf/cm.G (120 PSIG). Thus, for example, when you drive about 10 nails 3.75 mm x 90 mm (0.148” x 3-1/2”) per minute, a compressor with an air output over 55 l/minute is required. Pressure regulators must be used to limit air pressure to the rated pressure of the tool where air supply pressure exceeds

Operate the tool within the specified air pressure of 4.5 -8.5 kgf/cm.G (65 -120 PSIG) for safety and longer tool life. Do not exceed the recommended max. operating pressure of 8.5 kgf/cm.G (120 PSIG). The toot should not be connected to a source whose pressure potentially exceeds 14.0 kgf/cm.G (200 PSIG). Never use the tool with other than compressed air. If bottled gas (carbon dioxide, oxgen, nitrogen, hydrogen, air, etc.) or combustible gas (hydrogen, propane, acetylene, etc.) is used as a po