Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
– The indicator lights of the buttons come on if additional functions are active. – Switching off the additional option: touch the button again. The indicator light goes out. – You can select two additional functions at the same time for some programmes. ..Schnell (Quick) Shorten the washing time. For slightly soiled items. ....Spulen Plus (Rinse plus) Additional rinse cycle. Prolonged programme duration. For regions with very soft water or for further improving the washing result. ..Start/Nachlegen (Start/Reload) For starting or pausing the washing/drying programme. ..Hibernate mode The back light of the display will go out if the machine is not operated for 5 minutes before the programme starts, when the finish-in time starts counting down, or the programme ends. Touch any button first to activate the back light, then you can operate the machine. ..Signal volume (for button signal and information signal) ..Childproof lock ..............Programme will not be changed by accidental operation. To activate the childproof lock: – After the programme starts or finish-in time is activated ..Page 10, press and hold the Fertig in (Finish in) button for 5 seconds. – Release when the ..symbol lights up. If button signal is on, an acoustic signal will be heard. When the programme ends, the Start/Nachlegen indicator remains on to remind you to deactivate the childproof lock. To deactivate the childproof lock: – Touch the Fertig in (Finish in) button until the ..symbol turns off. – Release the button. ..symbol flashes if the programme has been changed while childproof lock is activated. If the childproof lock is deactivated while the programme selector is in a different position from when the childproof lock was activated, the programme which is currently running be halted. Set to ..Press and hold°C(Temp.) 1 step clockwise Button signals Information signals Set volume* Set volume*1 step clockwise Set to .. Release .. *If required, set repeatedly 1 step clockwise 1. Start signal mode 2. Set volume for ... direct Additional functions and Individual settings ..Please close the door immediately because the water level is rising. In pause status, and are displayed alternately. ..In pause status, is flashing if the spin speed is high, please just wait to let the spin speed drop down. If is continuously display in pause status then it means door is locked due to safety reasons(water level and/or temperature are too high). For the washing programme: If you need to open the door, wait for the temperature to drop or drain the water (e.g. select the Schleudern(Spin) or Abpumpen (Drain) programme). For the drying programme: If you need to open the door, wait for the temperature drop or set the time dry programme for 15 minutes to allow the laundry to cool down. The door cannot be locked/unlocked due to the high temperature of the door lock. Keep the machine switched on for about 1 minute. Then the machine can be locked/unlocked again. The door cannot be opened after the drying programme because the temperature is too high. The cooling process will continue until this display disappears and the door can be opened. If the laundry needs to be removed as soon as possible, select the ..Normaltrocknen..programme with a time dry period of 15 minutes to allow the laundry to cool down. No water supply during washing Tap turned on? Supply hose kinked or blocked? Inlet filter blocked? Clean the filter ..Installation and maintenance instructions, Page 8 No water supply during drying Tap turned on? Inlet filter blocked? Cooling water valve faulty? Clean the drain pump. ..Installation and maintenance instructions, Page 8; outlet pipe/drainage hose blocked. Flashing: The machine detected an imbalance in the drum that cannot be adjusted. The maximum spin speed cannot be reached in order to protect the machine. The washing solution will not be removed completely after spinning, and the subsequent drying programme is automatically stopped. If the drying cycle stops and ........flashes on the display, the cooling programme will keep running automatically until ........disappears and the door can be opened. -Wash or dry small and large items of laundry together. After the auto drying cycle, the symbols and ......are displayed alternately, suggesting that the drying result may not be satisfactory. – : the amount of laundry is too much. : the amount of laundry is too little. Other displays Switch off the appliance, wait 5 seconds and switch it back on. If the display appears again, call customer service. Information on the display installation and maintenance instructions and all other information the mains plug by pulling on the power cord. out the mains plug with wet hands. mains plug. cord and discard together with the plug. on the washer dryer door. This will prevent children from themselves in and putting their lives at risk. plastic film and packaging parts out of the reach of children. and care products out of the reach of children. pretreated wi...