Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Daewoo, модель DSA-9310E

Производитель: Daewoo
Размер: 1.93 mb
Название файла: 8d96880f-895b-4516-899a-5d3e5802a2d3.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Do not handle the power cord with wet hands. Do not pull the power cord to remove the plug from the socket. It may cause an electric shock or damage. Do not make any modifications. Never attempt to disassemble the unit. Do not place any liquid container on top of RECEIVER. If water spills into RECEIVER, an electric short may occur which can cause a fire. Do not overload wall outlets and extension cords. It may result in power failure. When a strange noise or smell comes from the RECEIVER, stop all operations and pull out plug. And then contact your Service agent. 5 Place the RECEIVER on a plain stable surface. If not, the RECEIVER may fall off or tip over causing injury or damage. Be sure to disconnect all cables before moving RECEIVER. Keep the RECEIVER safe from any foreign objects. Put the RECEIVER in a place of moderate temperature 5 - 40 degrees. If not, it may cause damage or shorten the lifetime of the RECEIVER. Do not put the RECEIVER in a place where it is Do not lay heavy objects on the RECEIVER. humid or dusty, or near oil, smoke or steam. It may cause ventilation trouble, internal temperature increasing, and fire. 6 Do not use water or oil to clean. Do not press two buttons of the remote controller in at the same time. Never attempt to disassemble remote controller. Do not put RECEIVER under the sunlight or near heating units. It may cause damage or shorten lifetime of the RECEIVER. Keep the RECEIVER away from magnets or vibration. It may cause blurred colour of screen and a damage. Ensure the RECEIVER is placed in a position with good ventilation. Leave a space more then 10Cm rear and 5Cm side from the wall. Do not plug in when the shape of socket does not match with the plug. 7 FRONT PANEL FRONT & REAR VIEW OF RECEIVER 1 2 3 4 5 6 7 POWER SOUND TV/AV MENU RECALL FRONT PANEL FRONT & REAR VIEW OF RECEIVER 1 2 3 4 5 6 7 POWER SOUND TV/AV MENU RECALL 1. POWER BUTTON Use to power unit on & off. 2. LED POWER : Displays RED when the unit is powered off or standby, GREEN when the unit is powered on. SOUND : Displays when the sound is STEREO or DUAL. 3. TV/AV BUTTON Use to select TV/External Input MODE. TV, AV1/2/3/4 is selected in order whenever the button is pushed. 4. MENU BUTTON Use to access MENU option. When The button is pressed once, MENU appears on the screen. 5. RECALL BUTTON Use to mark a channel banner. 6. LEFT/RIGHT (C / B) BUTTON Use to move cursor left/right in the MENU option or use to control sound volume. 7. UP/DOWN (V / W) BUTTON Use to move cursor up/down in the MENU option or use for change channel. 8 REAR PANEL REAR PANEL 1 2 3456 7 1. AV1, AV2 INPUT TERMINAL ( SCART TERMINAL ). Use to connect external input such as VTR, Satellite Receiver, DVD, etc. to the RECEIVER. 2. POWER CORD CONNECTOR Use to connect POWER CORD to the RECEIVER. 3. MONITOR / AUDIO OUTPUT TERMINAL Use to connect MONITOR or external speaker to the RECEIVER. 4. PC INPUT / AUDIO INPUT TERMINAL Use to connect PC input to the RECEIVER. PC input is transferred to output terminal when the power of RECEIVER is off. 5. AV3 INPUT TERMINAL (S-VIDEO, V/L/R) Use to connect S-VIDEO, A/V Input to the RECEIVER. S-VIDEO input is transferred to output terminal when S-VIDEO and RCA Video input is connected to the RECEIVER at the same time. 6. A/V4 INPUT TERMINAL(V/L/R) Use to connect A/V input to the RECEIVER. 7. ANTENNA INPUT TERMINAL Use to connect antenna to the RECEIVER. This RECEIVER can receive PAL/ SECAM except PAL M/N via antenna and can receive * PAL SECAM, NTSC input via external input terminal. 9 CONNECTION GUIDE CONNECTION GUIDE Connecting with Monitor Connect D-SUB input of MONITOR to the output terminal of D-SUB output of the RECEIVER. Connect input of speaker to audio output terminal of the RECEIVER. RECEIVER PC INPUT L AUDIO R MONITOR MONITOR BACK 10 1010 Connecting with an Aerial Plug the aerial into the coaxial socket. Notice This RECEIVER can receive SECAM/PAL except PAL M/N via antenna. RECEIVER RECEIVER 11 1111 Connecting with another Set Top Box or Video Equipment Connecting with another Set Top Box or Video Equipment Connect output of another STB or Video equipment (SCART, A/V, S-video) to input of the RECEIVER using SCART cable, A/V cable, S-video cable. Notice This RECEIVER can receive SECAM/PAL/NTSC via external input. - AV1, AV2 RECEIVER DVD -AV3, AV4 VCR 12 Connecting with PC Connect PC output (D-SUB & audio output) to input of RECEIVER (D-SUB & audio input). PC input can be outputted only when the power of RECEIVER is OFF. PC OUTPUT R AUDIO R PC RECEIVER PC BACK 13 REMOTE CONTROL MUTE BUTTON Switches the sound on or off. POWER BUTTON MULTIMEDIA BUTTON SOUND BUTTON RECALL BUTTON DIRECTION BUTTONS VOLUME BUTTONS PREV BUTTON PROGRAM BUTTONS MENU BUTTON TV/TEXT BUTTON DISPLAY POWER BUTTON TV/AV BUTTON REMOTE CONTROL MUTE BUTTON Switches the sound on or off. POWER BUTTON MULTIMEDIA BUTTON SOUND BUTTON RECALL BUTTON DIRECTION BUTTONS VOLUME BUTTONS PREV BUTTON PROGRAM BUTTONS MENU BUTTON TV/TEXT BUTTON DISP...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории