Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
Table of Contents Hooking up the system ......................... 4 Positioning the speakers ........................ 6 Listening to the sound ........................... 7 Adjusting the sound .............................. 7 Precautions .............................................. 8 Troubleshooting ..................................... 9 Specifications ........................................ 10 About this model The SA-VE230 is a 5.1 channel speaker system consisting of two front speakers, two rear speakers, one center speaker, and one subwoofer. It supports Sony Digital Cinema Sound, Dolby* Pro Logic, and Dolby Digital (AC-3), and is thus geared towards the enjoyment of movies. * Manufactured under license from Dolby Laboratories. DOLBY, the double-D symbol ;, “PRO LOGIC” and “Dolby Digital (AC-3)” are trademarks of Dolby Laboratories. Hooking up the system Connect the speaker system to the speaker output terminals of an amplifier. Make sure power to all components (included the subwoofer) is turned off before starting the hook-up. Subwoofer Center LINE IN WOOFER OUT FRONT CENTER REAR R R L L Front (Right) Front (Left) Rear (Left)Rear (Right) Amplifier Terminal (jack) connections Notes • Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding plus (+) and minus (–) terminals on the amplifier. • Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise. • Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short-circuit. • Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital (AC-3)). No bass will output from the subwoofer if you do. • For details regarding the connections on the amplifier side, refer to the manual that was provided with your amplifier. Tip All striped wires are minus (–) in polarity, and should be connected to the minus (–) speaker terminals. Positioning the speakers Location of each speaker Center Subwoofer Front (Right) Rear (Right) Rear (Left) Front (Left) Each speaker should face the listening position. Better surround effect will result if all speakers are set at the same distance from the listening position. Place the front speakers at a suitable distance to the left and right of the television. Place the subwoofer on either side of the television. Place the center speaker on the top-center of the TV set. The placement of rear speakers greatly depends on the configuration of the room. The rear speakers may be placed on both sides of the listening position A or behind the listening position B. Tips • Movies are best enjoyed in a room that produces no echoes (as in one with surrounding curtains). • Music (especially classical music) is best enjoyed in a room that produces some echo. Setting the speakers To prevent speaker vibration or movement while listening, attach the supplied foot pads to the bottom four corners of the center speaker, front speakers, and rear speakers. Front/Rear speakers Center speaker Foot pads Setting the center speaker Set the center speaker firmly on top of the TV set, making sure it is completely level. Foot pads Setting other speakers For greater flexibility in the positioning of the speakers, use the optional WS-FV10, WS-TV10, or WS-WV10 speaker stand (available only in certain countries). WS-FV10 WS-TV10 WS-WV10 (for rear speakers) Tip The height of the front speakers should be adjusted to about the center of the TV screen. Listening to the sound LEVEL MODE MIN MAX MOVIE MUSICPOWER POWER POWER indicator First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing the program source. 1 Turn on the amplifier and select the program source. 2 Press POWER on the subwoofer. The POWER indicator on the subwoofer lights up in green. 3 Play the program source. Adjusting the sound Slight adjustments to the system can enhance your sound enjoyment. Adjusting the subwoofer POWER LEVEL MODE MIN MAX MOVIE MUSIC LEVEL MODE 1 Set MODE according to the program source as follows: Source MODE DVD, LD, video cassette, MOVIE or other video source MD, CD, cassette tape, MUSIC or other audio source 2 Rotate LEVEL to adjust the volume. Set the volume level to best suit your preference according to the program source. Notes • Some amplifier functions for enhancing the sound may cause distortion in the subwoofer. If such distortion occurs, turn off those functions. • To enjoy high-quality sound, do not turn the subwoofer volume too high. • The bass sound is enhanced in MOVIE mode rather than in MUSIC mode. Therefore, if you change the mode to MOVIE while listening to some sources that do not include the bass sound, you may not be able to get the effect. Setting your amplifier to enjoy movies For the Dolby Digital (AC-3) If your amplifier is connected internally or externally with a Dolby Digital (AC-3) processor, you should ...