Оценок - 5, средний балл: 4.6
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Alternatively, press [CALL] to select the Call Channel. 2 Press [F] , [VFO] to copy the Memory Channel data to the VFO. Note: . On odd-split channels, the above operation copies only the reception frequency to the VFO (not the transmission frequency). To copy the transmit frequency of an odd-split channel, press [REV] before performing the transfer. . You can also transfer the Program Scan memory channels (L0/U0 ~ L2/U2), the Priority Channel (Pr) , and the Weather Alert Channel (AL) (K market models only) to the VFO. . Lockout status and Memory Names are not copied from a Memory Channel to the VFO. CHANNEL \ CHANNEL TRANSFER You can copy Channel to another. This function frequencies and change in Memory 1 Press [MR] , then turn the Tuning control or press Mic [UP] / [DWN] to recall the desired Memory 2 Press [F] . 3 Select the Memory Channel where you would data copied by using the Tuning control or pressing Mic [UP] / [DWN] . 4 Press [MR] . 7 33 7 7 Channel 0 ~ 199 a Channel 0 ~ 199 Receive frequency a Receive frequency Transmit frequency a Transmit frequency Tone frequency a Tone frequency Offset direction a Offset direction CTCSS frequency a CTCSS frequency DCS code a DCS code Tone/ CTCSS/ DCS ON/ OFF status a Tone/ CTCSS/ DCS ON/ OFF status Offset frequency a Offset frequency Reverse ON a Reverse ON Frequency step size a Frequency step size Memory Channel name1 a Memory Channel name1 Memory Channel Lockout ON/ OFF a Memory Channel Lockout ON/ OFF Narrow FM ON/ OFF a Narrow FM ON/ OFF 1 When “100” is selected in Menu No.15 (M.CH). Channel 0 ~ 199 a L0/ U0 ~ L2/ U2, Pr, AL 2 Receive frequency a Receive frequency Transmit frequency a Transmit frequency Tone frequency a Tone frequency Offset direction a Offset direction CTCSS frequency a CTCSS frequency DCS code a DCS code Tone/ CTCSS/ DCS ON/ OFF status a Tone/ CTCSS/ DCS ON/ OFF status Offset frequency a Offset frequency Reverse ON a Reverse ON Frequency step size a Frequency step size Memory Channel name1 a Memory Channel name1 Memory Channel Lockout ON a Memory Channel Lockout OFF Narrow FM ON/ OFF a Narrow FM ON/ OFF 2 The AL Channel is available for K market models only. Note: . When transferring an odd-split channel, the Reverse status, Offset direction, and Offset frequency are not transferred {pages 23, 26}. . Tone, CTCSS, and DCS are automatically turned OFF when transferring data to the Weather Alert Channel (AL). 34 CALL CHANNEL CALL CHANNEL • On K and M market [CALL] changes the transceiver to the Call • On E market models, pressing [CALL] causes the transceiver to transmit a The Call Channel can be recalled what frequency the transceiver For instance, you may use the Call emergency channel within your group. In this case, Call Scan {page 43} will be useful. The default Call Channel frequency is 144.000 Note: Unlike Memory Channels 0 to 199, the Call Channel cannot cleared. RECALLING THE CALL CHANNEL 1 Press [CALL] to recall the Call Channel. • The Call Channel frequency and “C” appear. •To return to the previous frequency, press [CALL] again. REPROGRAMMING THE CALL CHANNEL 1 Select your CTCSS, DCS, direction, • When you program channel, select a reception 2 Press [F] . • A Memory Channel number appears 3 Turn the Tuning control or press Mic [UP] / [DWN] to select the Call Channel (“C”). 4 Press [MR] . • The selected frequency and related data are the Call Channel. 7 To also store a separate transmit frequency, continue with the following steps: 5 Select the desired transmission frequency. 6 Press [F] . 7 Turn the Tuning control or press Mic [UP] / [DWN] to select the Call Channel (“C”). 8 Press [MR] (1s) . • The separate transmission frequency is stored in the Call Channel. 35 Note: . When you recall the display. . Transmit offset status and Reverse odd-split Call Channel. WEATHER ALERT (K MARKET MODELS ONLY) Any of the NOAA Weather Radio channels can be programmed to the AL memory channel of the transceiver. The transceiver can be configured the NOAA Weather Alert tone (1050 Hz) and will automatically alert you by recalling and Weather Radio frequency when the Weather Alert tone is broadcasted, and the “WX” icon will blink. PROGRAMMING THE WEATHER RADIO FREQUENCY The transceiver is preprogrammed to 162.550 MHz (WX1). You can store a different frequency to the AL channel to use this function. Refer to the NOAA channel frequency directory for your local weather channel frequency before you use the Weather Alert function. The latest Weather Radio information can be obtained from . 1 Press [VFO] . 2 Select your local NOAA Weather Radio channel frequency using the Tuning control or Mic [UP] / [DWN] . 3 Press [F] . • A Memory Channel number appears and blinks. 36 4 Turn the Tuning control [UP] / [DWN] to select the Alert Channel 5 Press [MR] . Weather Radio Frequencies ( MHz) WX1 WX2 WX3 WX4 WX5 WX6 WX7 162.550 162.400 162.475 162.425 162.450 162.500 162.525 Note: . When you perform Full Reset {page 63}, Radio freque...
Эта инструкция также подходит к моделям:Автомагнитолы - TM-271E (2 mb)