Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
F Vous pouvez obtenir un manuel d‘installation en francais chez notre representant en votre pays (ou le telecharger de notre page d‘ouverture (Lei puo avvere la versione italiana delle istruzioni di montaggio dalla nostra rapresentanza (piu vicina della sua citta., oppure scaricarla dalla nostra hompage ES Para obtener la version espanola de nuestro manual de instalacion, contacte nuestros representantes en su pais (o bajela de nuestra pagina de Internet (Electronic equipment is not household waste in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly. At the end of its service life, take this unit for disposal at a relevant official collection point. Components of MobiSet 3 digital CAP 310 HDP 171 1. Roof duct with mounting nut 2. Mounting plate 3. Turntable 4. Antenna boom 5. BAS 60 UFD 170 For an explanation of the connections, see the “Connection Examples” section and operating manual UFD 170. HTV 115 For an explanation of the connections, see the “Connection Examples” section and operating manual HTV 115. Product package Product package • Turntable with fitted BAS 60 and ready for connection cables with a length of 3.5 m • Power supply cable (10 m) for connection to on-board network • Mounting plate • Roof duct with sealing gasket • Sikaflex® 291 sealing glue (100 ml tube) • UFD 170 satellite combi receiver with connecting cables, infra-red sensor and infra-red remote control • HTV 115 LCD/TFT television set with connecting cables and operating manual • MobiSet 3 digital CAP 310 installation manual • UFD 170 satellite combi receiver and HDP 171 turntable operating manual Proper use Proper use Intended purpose Note: Installation instructions The MobiSet 3 digital CAP 310 is designed to receive digital TV and radio programs via satellite. The turntable is intended for the Kathrein planar antenna BAS 60. This antenna can be used to receive digital TV and radio signals in the frequency range from 10.70 to 12.75 GHz; the antenna cannot receive terrestrial signals (e.g. DVB-T). The turntable can only be used in conjunction with a Kathrein UFD 170 combi receiver or the Kathrein UFD 540 digital receiver and HDS 160 control unit. In conjunction with these two receivers, the turntable provides fully automatic alignment of the planar antenna to receive digital satellite signals. The turntable is designed for use in stationary caravans or motorhomes. Any use other than that specified above will void the warranty or guarantee. The following circumstances result in the loss of all warranty and liability claims towards the manufacturer: • Improper installation • Use of non-specified mounting materials, which cannot guarantee the mechanical reliability of the antenna system • Non-permissible use, e.g. use of the planar antenna for storage • Structural changes or interference with the components and mounting accessories in the set, which could endanger both the mechanical and functional reliability • Improper or forcible opening of the components • Use of cleaners containing solvents, such as acetone, nitro-cellulose combination thinner, naphtha etc. • Failure to observe installation and safety instructions in this manual The maximum permissible speed for vehicles with a BAS 60/HDP 171 receiver unit mounted on the roof is 130 km/h. Before commencing a journey, the planar antenna must always be lowered into horizontal position (park position). The turntable may be operated in an ambient temperature range of -10 °C to +40 °C. Operating the system outside these ranges can result in malfunctions or damage to the system. The turntable may only be assembled by qualified specialist personnel. To prevent hazards during installation, operation or when driving on public highways, the instructions and information in this manual must be strictly adhered to. Proper installation and connection of the system are pre-requisites for conformity with the corresponding standards. This has been documented in advance in the CE label and the declaration of conformity in the appendix to this manual. Safety instructions - important notes Safety during installation work When carrying out installation work in locations with a risk of falling, take appropriate safety precautions, e.g. use of a working platform. Make sure that the vehicle roof is sufficiently strong and stable to carry out the installation work (risk of damage or collapse of roof). In case of doubt, contact a qualified specialist dealer or the manufacturer...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - MobiSet 2 CAP 210 (1.79 mb)
Спутниковые ресиверы - MobiSet 3 CAP 310 (1.79 mb)
Спутниковые ресиверы - CAP 310 (1.79 mb)