Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Before first use Thoroughly clean the par ts that come into contact with food before you use the appliance for the first time (see chapter ‘Cleaning and storage’). using the appliance Juicer 1 2 3 4 5 6 7 preparing the juicer for use Make sure all detachable parts are clean (see chapter ‘Cleaning and storage’). Unwind the mains cord from the base of the motor unit (Fig. 3). Assemble the integrated pulp container onto motor unit (Fig. 4). Assemble the juice collector onto the integrated pulp container (Fig. 5). Assemble the filter onto the driving shaft of the motor unit. Make sure the filter is fittedsecurely onto the driving shaft (‘click’) (Fig. 6). Assemble the lid onto the juicer (Fig. 7). Lift the locking arm to locked position (‘click’) (Fig. 8). EnglisH 8 Place the lid on the juice jug to avoid spattering (Fig. 9). Note:The integrated foam separator ensures clear juice as an end result. 9 Place the juice jug under the spout (Fig. 10). Note: If you want to extract juice straight into a glass, use the spout accessory (Fig. 11). using the juicer The appliance only functions if all par ts are assembled correctly and the locking arm is in locked position. 1 2 Wash the fruit and/or vegetables and, if necessary, cut them into pieces that fit into the feeding tube. Make sure the juice jug is placed directly under the spout (Fig. 10). Note: If you want to extract juice straight into a glass, use the spout accessory. 3 Turn the control knob to setting 1 (low speed) or 2 (normal speed) to switch on the appliance (Fig. 12). Note: For hard fruits or vegetables (e.g. apples, beetroots and carrots) we advise you to use speed 2 (normal speed). For soft fruits or vegetables (e.g. berries, kiwi, grapes, tomatoes, cucumber and melon) we advise you to use speed 1 (low speed). 4 Put the pieces in the feeding tube and gently press them down towards the rotating filter with the pusher (Fig. 13). Do not exer t too much pressure on the pusher, as this could affect the quality of the end result. It could even cause the filter to come to a halt. Never insert your fingers or an object into the feeding tube. Align the groove of the pusher with the small protrusion on the inside of the feeding tube 5 6 7 8 and slide the pusher into the feeding tube (Fig. 13). When you have processed all ingredients or when the integrated pulp container is full, switch off the appliance and unplug it.Wait until the filter stops rotating. To empty the integrated pulp container, remove the lid, the filter and the juice collector. For maximum flavour and freshness, serve the juice immediately after preparation. Note: If you want to store the juice in the refrigerator, make sure the lid is on the juice jug. citrus press preparing the citrus press for use 1 Assemble the gear box onto the motor unit (Fig. 14). 2 Assemble the sieve holder onto the motor unit (Fig. 15). 3 Assemble the sieve onto the sieve holder (Fig. 16). 4 Assemble the cone onto the gear box (Fig. 17). 5 Lift the locking arm to locked position (‘click’). (Fig. 18) 6 Place the juice jug under the spout (Fig. 19). Note: If you want to extract juice straight into a glass, use the spout accessory. EnglisH using the citrus press 1 2 Wash the fruits and cut them into 2 halves. Make sure the juice jug is placed directly under the spout (Fig. 20). Note:To prevent damage and injuries, keep the running appliance away from long hair, clothes, cords, etc. 3 Turn the control knob to setting 1 (low speed) (Fig. 21). Note: Only use speed 1 for the citrus press. 4 Press a halved fruit firmly onto the cone (Fig. 22). Tip:The appliance is easier to clean if you do so immediately after use (see chapter ‘Cleaning and storage’). tips preparation -To extract the maximum amount of juice, always press the pusher down slowly. -Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots, celer y stalks, apples, cucumbers, carrots, spinach, melons, tomatoes, oranges and grapes are par ticularly suitable for processing in the juicer. -The juicer is not suitable for processing ver y hard and/or fibrous or starchy fruits or vegetables such as sugar cane. -Leaves and leaf stalks of e.g. lettuce can also be processed in the juicer. -Remove stones from cherries, plums, peaches, etc.You do not have to remove cores or seeds from fruits like melons, apples and grapes. -When you use the juicer, you do not have to remove thin peels or skins. Only remove thick peels that you would not eat, e.g. those of oranges, pineapples, kiwis, melons and uncooked beetroots. -When you prepare apple juice, take into consideration that the thickness of the apple juice depends on the kind of apple you use.The juicier the apple, the thinner the juice. Choose a kind of apple that produces the type of juice you prefer. -If you want to process citrus fruits with the juicer, remove the peel as well as the white pith. The white pith gives juice a bitter taste. -Fruits that contain starch, such as bananas, papayas, avocados, f...
Эта инструкция также подходит к моделям:Соковыжималки - HR1870/10 (11 mb)