Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
The PC card occupies 16 bytes of space starting the specified base address. If you don’t specify the I/O base address, 240h is applied. If the specified address is already used, specify another base address from the following addresses. 140 180 220 230 240 250 260 270 280 290 300 320 /socket=X Same as 7socket=X" in ASPIFMGR.SYS. /I365RST After setting this option, PCMCIA Controller ¡82365 should be reset. (Example) DEVICE=C:\CDRM\ASPIF365,SYS /port=280 /mem=c800 /socket=2 [ Options for Microsoft MS-DOS CD-ROM Extensions The format of the MSCDEX program in the AUTOEXEC.BAT file is as follows: MSCDEX [/V /K /E] /D:[DriverName] /L:[DriveLetter] /M:[Value] N Displays the list of additional information including how much memory is used by buffers, resident data and resident code. IK Type this only when the CD-ROM media directory is written in Kanji (Japanese). /E Expanded memory (EMS) is usable if this is available in your system. This conserves about 16 KB of main DOS memory. 32 Details of Setup Disk Software /D:[DriverName] Driver name is a required parameter to communicate with the CD-ROM drive. The internal name of KMECD.SYS is PCMCIACD, and should be substituted for [DriverName]. /L:[DriveLetter] Drive letter is an alphabetic character assigned to a CD-ROM drive. If there is more than one CD-ROM drive, the alphabetic characters are sequentially assigned starting with the entered drive letter. If no drive letter is entered, next available alphabetic character is assigned. If you assign except A~M for DriveLetter, you must change the DOS LASTDRIVE statement. In your CONFIG.SYS file, add a tine like this: LASTDRIVE= ^ Type the alphabetic character (N~Z) assigned to the last valid drive that DOS may use. /M:[Value] MSCDEX allocates the memory as sector buffers for caching CD-ROM information. If no buffer size is entered, 10 buffers each of which uses 2048 bytes of memory will be allocated. For example, to install MSCDEX with an internal name of PCMCIACD, use expanded memory, and configure the CD-ROM drive as drive H, enter: MSCDEX /E /D:PCMCIACD /L:H 33 Details of Setup Disk Software SCSI ID Number and Terminator ■ SCSI ID number: Each SCSI device connected to your computer system has an individual ID number (refer to the respective manuals). Be sure that the CD-ROM SCSI ID number does not conflict with another SCSI device connected to the computer system. Normally personal computer’s SCSI ID number is set to 7. The factory setting of the player’s SCSI ID number is set to 5. ■ Terminator: Set the Terminator switch ON or OFF according to the player’s condition. ON: when the player is connected to the computer system. OFF: when using independently as an audio player (power consumption can be saved) (P. 25). The factory setting is ON. Setting Set the ID number switch (1 -3) or Terminator switch (4) ON/OFF by using a pointed object like a pen, and referring to the table below (for ID number). DIP switch ON OFF rON 12 3 4 _l I Terminator ID number switch switch (For SCSI ID number setting) ID number ID number switch 1 2 3 0 OFF OFF OFF 1 ON OFF OFF 2 OFF ON OFF 3 ON ON OFF 4 OFF OFF ON 5 ON OFF ON 6 OFF ON ON 7 ON ON ON I I : Factory setting. Example: ID number=5/Terminator=ON 34 Maintenance' Player Cautions: • Do not use benzine, thinner, etc. • Do not use commercial lens cleaner. CD Cautions: • Do not use solvents such as benzine, record cleaners or anti-static spray for records. • Do not touch the signal side. • Do not attach the labels to the disc. • Do not write on the surface of disc with a pointed object like a pen. Ш 35 SCSI ID Number and Terminator / Maintenance Specifications Power Source: Refer to the nameplate at the bottom of the unit. Interface: PCMCIA/SCSI-1,2 Buffer Size: 128 KB Operating Environment (under no damp or moist conditions): Temperature: 5*C {41 ’F} to 35’C {95’F} Humidity: 20% to 85% RH Storage Environment (under no damp or moist conditions): Temperature: -20’C {-4”F} to 55’C {131 'F} Humidity: 15% to 85% RH Dimensions: 138 (W) x 204 (D) x 35 (H) mm {5.52" x 8.16" x 1.4"} Mass {Weight}: 0.46 kg {1.014 lb.} (without batteries) Battery Life [at 20'C {68'F}]: • When using Panasonic alkaline “AA” size batteries Approximately 4 hours when playing audio CD Approximately 2 hours when playing CD-ROM • When using the optional rechargeable battery Approximately 2 hours when playing audio CD Approximately 1 hour when playing CD-ROM Power Consumption: •When playing CD-ROM (with PC card) 12 W [with AC adaptor] •When player is off 1.0 W [with AC adaptor] Data Transfer Rate (when using AC adaptor): 150 KB/s (Normal Velocity mode) 600 KB/s (Quad Velocity mode) Output Connector: PHONES jack Compatible CD-ROM Format: CD-DA (CD) CD-ROM (Mode 1 and Mode 2 Form 1) Photo CD Multi-session CD-ROM XA (Mode 2 Form 2) VIDEO CD CD-I 36 Specifications Access Time* (when using AC adaptor): (The information is based on the test resu...