Оценок - 5, средний балл: 3.2
(
)
)
|
Фрагмент инструкции
00127 & UP) TSS-20 TURF SEEDER (Serial No. 00143 & UP) OPERATORS / PARTS MANUAL Schiller-Pfeiffer, Inc. 1028 Street Road • Southampton, PA 18966 Telephone: 1-800-366-6268 TRS-20 TURF RAKE (Serial No. 00127 & UP) TSS-20 TURF SEEDER (Serial No. 00143 & UP) OPERATORS / PARTS MANUAL TABLE OF CONTENTS INTRODUCTION ......................................2 Thank You ............................................................2 Read This Manual ................................................2 Warranty................................................................2 Measurements ......................................................2 Serial Numbers......................................................2 Ordering Parts ......................................................2 Directions ..............................................................2 Pre-Delivery Check List ........................................3 Delivery Check List ..............................................3 Owner’s Record......................................................3 SAFETY PRECAUTIONS ..........................4 Training ................................................................4 Preparation Safety ................................................4 Engine Safety ........................................................4 Operational Safety ................................................4 OPERATION ..............................................5 Preparation ............................................................5 Starting Engine......................................................5 Transporting TURF RAKE/ TURF SEEDER..........5 Operating TURF RAKE/ TURF SEEDER ..............5 OPTIONAL BLADE ASSEMBLIES ............6 Changing Blade Assemblies ..................................6 Replacing Shaft Assembly Only ............................6 Recommended Height Adjustments......................6 INTRODUCTION THANK YOU Thank you for purchasing a CLASSEN TRS-20/ TSS-20. READ THIS MANUAL Read this manual carefully in its entirety. It contains assembly, operating, maintenance, adjustment instructions and a parts list for your TRS-20/TSS-20. By following the operating and maintenance instructions you will prolong the life of your equipment and maintain its maximum efficiency. Failure to do so could result in personal injury or equipment damage. This manual should be considered a permanent part of your TRS-20/TSS-20 and should remain with it if you sell it. WARRANTY Refer to last page. GENERAL MAINTENANCE ......................8 TURF RAKE/ TURF SEEDER Maintenance ........8 Engine Maintenance..............................................8 MACHINE STORAGE ................................8 Storing TURF RAKE/ TURF SEEDER ..................8 Operation After Extended Storage ........................8 CARE FOR HYDRAULIC SYSTEM ............9 PARTS MAIN FRAME ASSEMBLY ..........10 PARTS SELF PROPELLED ASSEMBLY ....11 PARTS HANDLE ASSEMBLY ....................12 SEEDER/MULTIPURPOSE BLADE ASSEMBLY ..................................13 SLICER BLADE ASSEMBLY ....................13 SEED BOX ASSEMBLY ............................14 SEEDER TIRE SCRAPE INSTALLATION 15 SEED BOX INSTALLATION ....................15 SAFETY DECALS ....................................16 NOTES ....................................................17 WARRANTY ............................................18 MEASUREMENTS U.S. Units of measure are used in this manual. SERIAL NUMBERS Write frame and engine serial numbers, plus model numbers in “Owner’s Record” section below. You may need these numbers when you order parts. The serial number sticker plate is located near the left rear corner of the TRS-20/TSS-20 frame. ORDERING PARTS When ordering parts, always give the serial number and model of your TRS-20/TSS-20 as well as the quantity, part number and description of the part needed. DIRECTIONS “Right Hand” and “Left Hand” sides of the TRS-20/TSS-20 are determined by facing the “back” of the unit as you would operate the machine. PRE-DELIVERY CHECK LIST CHECK THE FOLLOWING BEFORE YOU DELIVER THE TRS-20/TSS-20 TO THE CUSTOMER. 1. Guards and shields fastened in place. 2. Decals fastened and legible. 3. Gas lever on engine turned on. 4. All lubrication points greased. 5. Air cleaner. 6. Touch up scratches. 7. Add engine oil (refer to Engine manual) 8. Add fuel, start engine, test run. DATE SET UP __________/__________/__________ DELIVERY CHECK LIST REVIEW THE OPERATORS MANUAL WITH THE CUSTOMER. 1. Classen Mfg., Inc. warranty. 2. Safe operation and service. 3. How to use controls. 4. Operating the machine correctly. 5. Transporting the TRS-20/TSS-20. 6. Correct fuel and lubricants. 7. Daily and periodic inspections. 8. Changing oil after break-in period. 9. Servicing the TRS-20/TSS-20 regularly and correctly. 10. Classen Mfg., Inc. parts and service. 11. Give the customer the Operator’s Manual and encourage customer to read it. DATE DELIVERED __________/__________/__________ SIGNATURE ________...
Эта инструкция также подходит к моделям:Системы вентиляции - TSS-20 (1.36 mb)
Системы вентиляции - TRS-20 (1.36 mb)
Системы вентиляции - TSS-20 (1.36 mb)