Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации HP, модель HP Gigabit Ethernet and 100Base-T Cards

Производитель: HP
Размер: 157.99 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста


К этому устройству также есть другие инструкции:

Фрагмент инструкции


Problems fixed in recent versions
Table 2 HP-UX 11i v2 September 2010 Fixes — IEther-00 B.11.23.1009
SR Number
Description
QXCR1001049943
NULL pointer de-reference in iether driver function “iether_send_complete” causes a “Data
Key Miss Fault,” which causes a system crash.
4 Known problems and limitations

Installing IEther-00 B.11.23.1107 with TSO enabled causes a system panic.
If you install IEther-00 version B.11.23.1107 on a server with TSO enabled for certain cards,
the system panics. This problem occurs with the following cards: AD337A, AD338A, AD339A,
447883-B21, 445978-B21.
This problem will be corrected in a future release of the IEther-00 bundle.
Workarounds:

If you have TSO enabled and you do not need any of the fixes described in Table 1
(page 3)
, then do not install this version of IEther-00.

If you need one or more of the fixes described in Table 1 (page 3), then disable TSO
before installing this version of IEther-00.
To disable TSO on each specific interface, use the lanadmin command to set the “vmtu”
tunable to 0 for each PPA (Physical Point of Attachment) number. For example:
# lanadmin -X vmtu 0
For more information on the lanadmin command, see the Ethernet Support Guide for
HP-UX 11i v2 and 11i v2
. This document is available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs

No lanboot support for NC360m.
Lanboot of HP-UX 11i v2 is not supported on the NC360m 2-port gigabit mezzanine card.
Workaround: None at the time of this publication.
5 Compatibility and installation requirements
This section describes the compatibility information and installation requirements for this release.

For specific installation instructions, see the installation procedure or overview document for
your card.

For detailed information on supported server platforms, operating systems, and firmware level
requirements, see the Ethernet Support Matrix.
These documents are available at:
http://www.hp.com/go/gigabit-ethernet-100bt-cards-docs

Support Matrix documents are listed alphabetically in the “General reference” section.

Installation guides are listed alphabetically in the “Setup and install — general” section.
5.1 Operating system and version compatibility
This release is specific for HP-UX 11i v2 (B.11.23).
5.2 Hardware requirements
This version of IEther-00 runs on HP Integrity and HP 9000 servers with the HP-UX 11i v2 (B.11.23)
operating system.
4


...

Эта инструкция также подходит к моделям:
Сетевое оборудование - HP-UX 11i v2 I/O Cards (157.99 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории