Read through the Operator‘s Manual carefully and understand the content before using the machine. Always use • A protective helmet where there is a risk of falling objects • Ear protection • Approved eye protection max 10000 rpm Max. speed of output axle, rpm This product is in accordance with applicable CE directives. Beware of thrown objects and ricochets. The operator of the machine shall ensure, while working, that no persons 15 m 15 m 50FT50FTor animals come closer than 15 metres. Blade can

English – 7 SAFETY INSTRUCTIONS General safety instructions IMPORTANT INFORMATION • The machine is only designed for trimming grass. • The only accessories to be used with the engine unit as a drive source are the cutting units we recommend in the chapter “Technical data“. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of your body. • Use personal protective equipment. See the sectio

12 – English ASSEMBLY Assembling other guards and cutting equipment • Fit the guard (A) intended for use with the trimmer head. Secure using four bolts (L) and the support plate (M) as shown in the diagram. • Fit the disc drive (B) on the output axle. • Turn the blade axle until one of the disc drive’s holes aligns with the corresponding hole in the gear housing. • Insert the locking pin (C) into the hole to lock the axle. • Screw on the trimmer head (H) in the direction of rotation. • Dismantli

Long periods at full throttle without any load on the engine can lead to serious engine damage. ! WARNING! Sometimes branches or grass get caught between the guard and cutting attachment. Always stop the engine before cleaning. WARNING! Machines fitted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. A blade thrust can be violent enough to cause the machine and/or operator to be propelled in an

• Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. • Never use the machine without a guard nor with a defective guard. • All covers must be correctly fitted and undamaged before you start the machine. Starting and stopping ! WARNING! The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury. Al

Only use the recommended cutting attachment. See the chapter on Technical data. • Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared. • The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter. • Make sure that the cutter on the trimmer guard is

GLOVES Gloves should be worn when necessary, e.g., when fitting cutting attachments. 6 – English GENERAL SAFETY PRECAUTIONS BOOTS Wear boots with steel toe-caps and non-slip sole. CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts sandals or go barefoot. Secure hair so it is above shoulder level. FIRST AID KIT Always have a first aid kit nearby. Machine.s safety equipment This s

Take great care when working on sloping ground. 5Keep a good balance and a firm foothold. 6Always hold the machine with both hands. Hold the machine on the right side of your body. 7Keep the cutting attachment below waist level. 8The engine must be switched off before moving. 9Never put the machine down with the engine running unless you have it in clear sight. WARNING! Neither the operator of the machine nor anyone else may attempt to remove the cut material while the engine is running or the c

speed, left/right handles, min: At max. speed, left/right handles, max: GR 2026D 1,64/26,9 1,38/35 1,10/28 2 700 11 000-11 700 10 000 0,9 KW/ 9 000 rpm Yes Yes Walbro CD Champion RCJ 7Y NGK BPMR7A 0,02/0,5 Walbro WT 1,06/0,5 13,2/6,0 93/99 2,0/2,2 2,2/3,0 1,8/2,1 2,5/3,6 GR 2032D 1,88/30,8 1,38/35 1,26/32 2 700 11 000-11 700 10 000 1,1 KW/ 8 400 rpm Yes Yes Walbro CD Champion RCJ 7Y NGK BPMR7A 0,02/0,5 Walbro WT 1,06/0,5 14,3/6,5 90/100 2,5/2,5 3,0/3,5 2,0/2,0 5,1/4,9 GR 2036 2,21/36,3 1,50/38 1

• NOTE! Never use a machine without the possibility of calling for help in the event of an accident. 2.Avoid usage in unfavourable weather conditions. For example, thick fog, heavy rain, strong winds or extreme cold, etc. To work in bad weather conditions is tiring and can create dangerous circumstances, e.g. slippery surfaces, affect a tree‘s direction of fall, etc. 3.Make sure you can walk and stand safely. Look out for any obstacles with unexpected movement (roots, stones, branches, pits, dit