No. Description 1693847 5HP Rear Tine Tiller 6.5HP Rear Tine Tiller Mfg. No. Description 1693848 6HP Rear Tine Tiller 1721526-00 Rev 1/2001 TP 10 0-24 85-0 0-RT-S O Simplicity MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 © Copyright 2001 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA. Table Of Contents TABLE OF CONTENTS.........................................1 OPERATION SAFETY...........................................2 Own

Nos.: 1692878 - Hiller / Furrower © Copyright2009 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 20 TP 400-2033-01-RT-S Hiller/Furrower Attachment REF NO PART NO. QTY. DESCRIPTION 1 1931352SM 2 BOLT, Carriage, 3/8-16 x 1-1/2 2 1931333SM 4 BOLT, Carriage, 5/16-18 x 3/4 3 1723726SM 1 HILLER WING, Left 3 1723727SM 1 HILLER WING, Right (Not Shown) 4 1960044SM 4 WASHER, Flat, 5/16 5 2820426SM 4 LOCKWASHER, External Tooth, 5/16 6 1933126SM 4 WING NUT, 5/16-18 7 1960268SM 1 BO

Standard, 32-1/2 In. with Tine Extensions TILLING DEPTH 0 to 7 Inches, Adjustable ATTACHMENT TO HUB: Bolted TO SHAFT: Pin and Spring Clip DRIVE INNER: Pin Type Floating Drive OUTER: Pin and Torsion Plate Floating Drive SPEED 75 RPM at Full Engine Speed DEPTH BAR TYPE Pivots in Reverse ATTACHMENT Pin and Spring Clip ADJUSTMENT 0 to 7 Inches Tilling Depth CONTROLS LOCATION FORWARD CLUTCH: Right Handle, Top REVERSE CLUTCH: Left Handle, Bottom THROTTLE: Center Mounted HA

* Cover—on pre-printed two-tone “Swash” stock. Press: * Body—1-color, 2-sided * Cover imprint —1-color, 1-sided Bindery: * Saddle Stitch, Face Trim * Face Trim COVERS: * This file may contain several manuals, which differ only in their covers. * Covers are all present at the beginning of this file. * Back cover for a particular manual is the page IMMEDIATELY AFTER the front cover. • Check the front cover for the individual part number (typically a 171xxxx number). BODY: • The body of the manual

Belt Replacement 4. Lift forward idler pulley (item C) by hand and remove cotter pin (item E) to disconnect the link rod from the bellcrank. 5. Remove reverse v-belt from engine pulley, and then work it out around reverse idler (item D) and over link rod. 6. Work reverse v-belt out around forward idler (item C), over link rod, and off tiller. 7. Install new inner belt in reverse order of its removal. 8. Reinstall both link rods in bellcranks and reinstall cotter pins (items E and F). Be sur

Description 6HP Product 1694161 1694908 Rear Tine Tillers 6HP Series 6016 RT, 6HP Tiller 6016 RT, 6HP Tiller Part No.: 1730319 Rev. 11/2005 TP 400-2625-01-RT-S Table Of Contents s PRODUCT COMPONENTS PAGES Handle Bar Group ................................................................................................................................................ 4 Hood, Drag Stake & Tine Group .....................................................................................................

No. Description 7HP Product 1694162 7016 RT, 7HP Tiller 1694909 7016 RT, 7HP Tiller 1730320 Not for Reproduction Table Of Contentss PRODUCT COMPONENTS PAGES Handle Bar Group ................................................................................................................................................ 4 Hood, Drag Stake & Tine Group .......................................................................................................................... 6 Engine, Belts & Wheels G

INC. PACKING П]о Rotirul is delivered complete in one carton. Tli« carton contains 1 • Cover 1 - Reverse Rod 1 • Handle АпчетЫу 1 - Rpiiitg Ex[eti2iou 1 - Eii^nt, Frame and ТУшшшип Housing Assembly 2 • Wheel and lire Assemblies w/bolts and nuts 1 - Depth Бог 4 • Tine Assemblies 1 - Bitguf Hard wart; 1 - Uamp Should sliurLijjeJ of ajlj' of the ah о vc ilvmis oucur, advise by ¿tatb)g Packcr’? numb*r listed dji green picking slip, part number and description of items missing. ASSEMBLY 1

Crank engine a few times to blow excess oil out of plug hole. Then reinstall the plug. 3. Fill fuel tank with fresh gasoline (unless a fuel stabilizer was used). 4. Start the engine outdoors. Do not run engine at high speeds immediately after starting. Check tiller and engine (5-hour care) 1. Check tiller and engine for loose screws, pins, bolts, oil leaks, etc. 2 Clean area around oil fill plug. NOTE Engine must be level. 3. Check/add engine oil as follows: A. Remove oil fill plug. B.

Thoroughly inspect the rotary tiller for any damage before restarting and operating the rotary tiller. STOPPING THE ROTARY TILLER To stop the rotary tiller while it is in operation, simply move tractor PTO switch to its disengaged position. Do this immediately if you even suspect that the tines are striking rocks. ^WARNING For your personal safety, be aware that tiller does not disengage when tractor clutch is depressed. The tiller is disengaged with the tractor PTO switch. STARTING THE ROT