42.5 cm3 Cutting swath .......................................................................................................................................................... 457 mm Engine displacement ................................................................................................................................................ 30 cm3 Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.78 k

• Remove the flanged washer from the gear head shaft and retain it for the string head installation. • Remove the three screws securing the brushcutter guard to gear head. • Remove the brushcutter guard. NOTE: Store the brushcutter parts together for later use. INSTALLING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD See Figures 10 - 12. • Install the grass deflector. Refer to To Attach the Straight Shaft Grass Deflector earlier in this manual. • Place the flanged washer on the gear head sh

Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNINg: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNINg: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. FUELINg A

CUTTING TIPS See Figures 16 -17. . Avoid hot surfaces by always keeping the tool away from your body. (Proper operating position shown in figure 15.) . Keep the trimmer tilted toward the area being cut; this is the best cutting area. . The curved shaft trimmer cuts when passing the unit from right to left. The straight shaft trimmer cuts when passing the unit from left to right. This will avoid throwing debris at the operator. Avoid cutting in the dangerous area shown in illustration. . Use the

WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. WARNING: Blades are sharp. When installing and removing the blade, wear non-slip, heavy-duty protective gloves. Do not place your hand or fingers in any position where they could get cut. NEVER touch the blade or service the unit with the battery pack installed. Fig. 3 HEX KEY HEX KEY STORAGE POSITIONING PIN HOLE MOUNTING CLAMP PIN MOUNTING CLAMP 9

Bystanders should be encouraged to wear eye protection. If you are approached, stop the unit immediately. • Only for use on attachment-capable, gas-powered trimmers that have the On/Off Stop control located on the grip. On/Off Stop Control (located on grip) RULES FOR SAFE OPERATION • The TBBC is specifically approved for use with the following models of attachment-capable trimmers: Ryobi: Troy-Bilt: 775R TB20CS 750R TB25CS 790R TB25ET 890R TB70SS TB75SS Yard Man: TB90BC YM25 TB425CS YM75 TB475SS

Cut from side of tree opposite branch you are cutting. ... Do not cut from a ladder; this is extremely dangerous. Leave this operation for professionals. ... Do not to make the flush cut next to the main limb or trunk until you have cut off the limb further out to reduce the weight. Following proper cutting procedures will prevent stripping the bark from the main member. ... Do not use the pruner for felling or bucking. ... To prevent electrocution, do not operate within 50 ft. of overhead elect

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. ERGONOMIC DESIGN The design of the trimmer provides for easy handling. It is designed for comfort and ease of grasp when operating in different positions and at different angles. GRASS DEFLECTOR The trimmer includes a grass deflect

When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE Su nuevo accesorio para cultivar ha sido disenado y fabricado de conformidad con estrictas normas de calidad para brindar fiabilidad, facilidad de uso y seguridad para el operador. Con el debido cuidado, le brindara muchos ano

. Reinstall the washer and wing nut. . Tighten wing nut securely. ATTACHING THE “J” HANDLE - BC30 See Figure 5. A “J” handle must be used for ensuring the best control and maximizing operator safety when using a brushcutter. . Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left. . Insert the end of the handle between the clamps. . Align the bolt holes and push the long bolt (1/4-20 x 1-1/2 in.) through the handle side. . Pla