Оценок - , средний балл: ( )

Инструкция по эксплуатации Bradley, модель BTSTCE240

Производитель: Bradley
Размер: 154.8 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

• Always attach plug to appliance first, then plug into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet. • Do not use appliance for other than intended use. • Save these instructions. • For household use only. • Be cautious of sharp edges, when assembling and operating your smoker. • Lift and move smoker with care to prevent strains and back injuries. • Use caution when reaching into or around smoker. • It is recommended a fire extinguisher be placed near the smoker. Refer to your local authority to determine proper size and type of fire extinguisher. • If an extension is required, the cord must be an approved 3-prong (grounded) heavy duty cord not over 6 feet long. • Do not use power cords if they have been damaged. • Do not use any other type of wood other than Bradley Flavour Bisquettes®. • Properly dispose of all packaging. When in Use • For outdoors use only. Do not operate in an enclosed area. • Do not leave unattended. • Do not plug in the smoker until it is fully assembled. • Do not cover or seal the racks or drip tray with metal foil. This can cause severe damage to your smoker. • Do not put the rectangualr tray any place other than the bottom of the unit, as this can cause severe damage to your smoker. • Do not move smoker. • Do not exceed a temperature of 320°F. • Always wear oven mitts or gloves to protect hands from burns. • Do not wear loose clothing or allow hair to hang freely. • Do not use packaging box to cover the smoker. • Use only approved grounded electrical outlet. • Do not allow rainwater to come in contact with smoker at any time. • Do not use during an electrical storm or in windy conditions. • Do not use near gasoline or other flammable liquids, gases, or where flammable vapors may be present. • Place in an area where children and pets cannot access. • Do not immerse in water. After Each Use • Unplug smoker when it is not in use. • Check for grease and residue left in the water bath. Remove or clean water bath if it is 3/4 full. Clean smoker thoroughly. • Place extinguished Bradley Flavour Bisquettes® at a safe distance from all structures and combustible materials. • Store the smoker in a dry covered place out of reach of children. “Carefully read through Assembling Instructions to prepare smoker for use.” 2 ASSEMBLING INSTRUCTIONS Refer to Part numbers in Bradley Smoker External Part List and Internal Component list Diagrams. How to Assemble the Bradley Smoker® 1. Remove smoker from box. 2. Take all packaged parts out of smoker. 3. Remove all protective packaging materials from parts. Install Smoke Generator: Attach smoke generator (1) to the smoker tower (2). Aim the bisquette burner (F) toward the tower opening. Align smoke generator key holes to smoker tower locating supports (3). Secure the generator by pushing down firmly. Insert the feed tube (4) on top of the smoke generator and load it with the desired number of Bradley Flavour Bisquettes®. Plug the short power cord (A) from the smoke generator into the smoker tower. Set Up Smoker Tower: Place drip tray (B) onto the bottom side ladder. Place cooking racks (C) onto the side ladders above the drip tray. Place rectangular tray (J) at the bottom of the unit. Fill the waste pot half full with water and place on the rectangular bottom tray (J) in waste pot position (D). Plug the longer power cord (E-not shown) from smoker tower into the approved grounded electrical outlet. To Remove Smoke Generator: Unplug short power cord. Detach smoke generator from the smoke...