Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
(40 mm) Stroke: 0.98 in. (25 mm) Engine power to 1.40 hp ISO 8893: (1.05 kW) at 7,000 rpm Idle speed: 2,800 rpm Cut-off speed (rated): 10,500 rpm Max. output shaft speed (chain sprocket): 8,290 rpm Valve clearance Inlet valve: 0.004 in. (0.10 mm) Exhaust valve: 0.004 in. (0.10 mm) HT 130, HT 131 Displacement: 2.22 cu.in (36.3 cm3) Bore: 1.69 in (43 mm) Stroke: 0.98 in. (25 mm) Engine power to 1.90 hp (1.4 kW) ISO 8893: at 8,500 rpm Idle speed: 2,800 rpm Cut-off speed (rated): 10,500 rpm Max. output shaft speed (chain sprocket): 10,500 rpm Valve clearance Inlet valve: 0.004 in. (0.10 mm) Exhaust valve: 0.004 in. (0.10 mm) Ignition System Electronic magneto ignition English HT 100, HT 101 Spark plug (resistor type): Bosch USR 7AC Electrode gap: 0.02 in. (0.5 mm) HT 130, HT 131 Spark plug (resistor type): NKG CMR 6H Electrode gap: 0.02 in. (0.5 mm) Chain lubrication Fully automatic, speed-controlled oil pump with rotary piston Oil tank capacity: 7.4 fl.oz (0.22 L) Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 17.9 fl.oz (0.50 L) Weight dry, without bar and chain HT 100: 12.1 lbs (5.5 kg) HT 101: 16.8 lbs (7.6 kg) HT 130: 12.6 lbs (5.7 kg) HT 131: 17.2 lbs (7.8 kg) HT 100, HT 101, HT 130, HT 131 English Cutting Attachment Rollomatic guide bars Reduced kickback STIHL guide bar (with green label) Cutting length: 12 in. (30 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.043" (1.1 mm) Nose sprocket: 7-teeth 3/8" Picco chain Reduced kickback STIHL saw chain (with green label) Picco Micro Mini Comfort 3 (61 PMMC3) Pitch: 3/8" P (9.32 mm) Drive link gauge: 0.043" (1.1 mm) Chain sprocket 6-tooth for 3/8" P (spur sprocket) Please ask your STIHL dealer for the latest recommendations on new bar/chain combinations developed after publication of this instruction manual. Special Accessories Contact your STIHL dealer for information regarding special accessories that may be available for your product. Maintenance and Repairs Users of this unit should carry out only the maintenance operations described in this manual. Other repair work may be performed only by authorized STIHL service shops. Warranty claims following repairs can be accepted only if the repair has been performed by an authorized STIHL servicing dealer using original STIHL replacement parts. Original STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts. HT 100, HT 101, HT 130, HT 131 English STIHL Incorporated Federal Emission Control Warranty Statement Your Warranty Rights and Obligations The U.S. Environmental Protection Agency (EPA) and STIHL Incorporated are pleased to explain the Emission Control System Warranty on your equipment type engine. In the U.S. new 1997 and later model year small off-road equipment engines must be designed, built and equipped, at the time of sale, to meet the U.S. EPA regulations for small non road engines. The equipment engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. STIHL Incorporated must warrant the emission control system on your small off-road engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your small off-road equipment engine. Your emission control system includes parts such as the carburetor and the ignition system. Also included may be hoses, and connectors and other emission-related assemblies. Where a warrantable condition exists, STIHL Incorporated will repair your small off-road equipment engine at no cost to you including diagnosis (if the diagnostic work is performed at an authorized dealer), parts and labor. Manufacturer's Warranty Coverage In the U.S., 1997 and later model year small off-road equipment engines are warranted for two years. If any emission- related part on your engine is defective, the part will be repaired or replaced by STIHL Incorporated free of charge. Owner's Warranty Responsibilities As the small off-road equipment engine owner, you are responsible for the performance of the required maintenance listed in your instruction manual. STIHL Incorporated recommends that you retain all receipts covering maintenance on your small off- road equipment engine, but STIHL Incorporated cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. Any replacement part or service that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the engine manufacturer. As the small off-road equipment engine owner, you should be aware, however, that STIHL Incorporated may deny you warranty coverage if your small off-road equipment engine or a part has failed due to abuse, neglect, improper maintenan...
Эта инструкция также подходит к моделям:Садовые инструменты - STIHL HT 100 (2.33 mb)
Садовые инструменты - STIHL HT 100 (2.33 mb)
Садовые инструменты - STIHL HT 101 (2.33 mb)
Садовые инструменты - STIHL HT 130 (2.33 mb)