LINE, WATTS 25 V. LINE WATTS 45 - 15.0 85 60.0 7.5 125 40.0 5.0 250 20.0 2.5 500 10.0 - 1000 5.0 - 2000 2.5 - NOTE: C.S.A. reference guide: 386-0-0.8 Class: 2268 Specifications are subject to change without notice 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A. ©2001 ATLAS SOUND LP Printed in U.S.A. 00801 TELEPHONE: (800) 876-3332 • ATS000707 RevB 8/01 FAX: (800) 765-3435 PN 316972

Prior to re-assembly, make certain that joining surfaces of enclosure is free of dirt. Tighten all cover bolts completely. To provide the specified protection in hazardous locations, please note that no compound of any type is to be applied on machined flange. INSTALLATION OF MATCHING TRANSFORMER Atlas Sound Model T-18, 60 Watt line matching transformer is listed by UL and C.S.A. for installation within the explosion-proof driver enclosure. Primary Winding: 2000/1000/500/250/125/85/ (45 Ohms)

"Stealth Mat" • Full function remote control Brand New Integrated Amplifier for the DiVA Range Few companies can boast a 30 year history in making world class integrated amplifiers. Arcam is one of the few. Not only does the company enjoy a top-level reputation for the quality of its amplifiers, it remains the UK's number one producer of integrated amps. While in recent years the Arcam has excelled in developing stunning home cinema units, its heart remains in music reproduction and in desig

These must be removed and the appropriate wood side cheeks fitted before the amplifier is first used. See page 5 for full details. 2. Please retain the carton and all packing materials provided with this equipment so that it may be repacked correctly if it ever becomes necessary to transport the unit or to return it for service. , 3. If servicing is required then the equipment should be properly packed and returned to the dealer from whom it was purchased. It is essential to include a covering

НЕ ОТКРЫВАТЬ. ▲I ПРЕДОСТЕРЕЖЕНИЕ: Для того чтобы уменьшить риск поражения электрическим током, не снимайте крышку или заднюю панель устройства. Внутри устройства отсутствуют части, которые пользователь мог бы обслуживать самостоятельно. Обслуживание устройства должен выполнять только квалифицированный персонал. ПРЕДУПРЕЖДЕНИЕ: Для того чтобы уменьшить риск возгорания или поражения электрическим током, не подвергайте данное устройство воздействию дождя или влаги. А А Символ молнии внутри ра

The 12V-trigger uses a 3.5mm mono jack plug, wired as follows: < Sleeve: Ground< Tip: ActiveWhen the C31 is powered-on, the tip carries 12V, current- limited to 30mA; other- wise the tip carries 0V. The remote-in also uses a 3.5mm mono jack plug, wired as above. Remote control signals must be in modulated RC5 format, with a voltage level of 5–15V. Note that the remote receiver will require its own power-supply. Details of the Xantech ‘Dinky Link’ can be found at or ask your dealer. Recording an

A single conductor and an overall shield are most common, as in the standard cables supplied with consumer equipment. Keep unbalanced wire lengths within 10' between equipment, wire the hot lead to the “+” terminal, and the shield to the ground terminal. Install a jumper wire between the “-” terminal and the ground – a loss of gain will result without this jumper (Figure 4). JumperWhite/Red (+) ShieldWhite/Red (+) Shield Figure 4 Specifications are subject to change without notice AtlasSound.com

Внутри устройства нет узлов, которые должен обслуживать пользователь. Ремонт устройства должен выполнять только квалифицированный специалист. ПРЕДУПРЕЖДЕНИЕ: Во избежание возгорания или поражения электрическим током не подвергайте устройство воздействию дождя и влаги. Символ молнии со стрелкой, вписанной в равносторонний треугольник, предназначен для предупреждения пользователя о том, что внутри устройства имеется неизолированное «опасное напряжение», величина которого может представлять опас

This includes Warnings and Cautions on use and details of how to bi-wire your loudspeakers. 2. D290 integrated amplifier operating instructions. 3. D290P power amplifier operating instructions. (The Xeta 290P power amplifier has different front panel graphics but is functionally identical). 4. Using the D290&D290P together to biamp your loudspeakers. N.B. Circled numbers eg © refer to items on the diagrams inside the flap of the front cover. INSTALLATION ® Check that your mains supply volt

• TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435 ©2006 ATLAS SOUND LP Printed in U.S.A. 00406 ATS002329 RevA 04/06 PP o AARMK2-5 INSTALLATION INSTRUCTIONS Configuration #2 - Mounting one AA35 or PA601 1. Disconnect amplifier from electrical source. 2. Remove the four feet. 3. Remove front two screws from sides of amp. 4. Align and secure the chassis extension plate to a rack ear using the enclosed screws and nuts. 5. Align the rack ear and extension assembly to the chassis holes on the