Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Straight Through Cable 1 2 1 2 3 6 3 6 The two active pairs in a 100BASE-TX network are pins 1 & 2 and pins 3 & 6. Twisted Pair #1 Use only dedicated wire pairs (such as blue/white & white/blue, orange/white & Twisted white/orange) for the active pins. Pair #2 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result damage to the public telephone network. Der Anschluss dieses Gerates an ein offentlickes Telekommunikationsnetz in den verstosst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Angleichung der Rechtsvorschriften der Mitgliedstaaten uber Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer Konformitat. Compliance Information UL Listed C-UL Listed (Canada) CISPR/EN55022 Class B FCC Regulations This equipment has been tested and found to comply to part 15 of the FCC rules. These limits are designed to provide reasonable interference when the equipment is operated This equipment generates, uses, and can radiate radio frequency energy instruction manual, may cause harmful Operation of this equipment in a residential area is likely required to correct the interference Canadian Regulations This digital apparatus does the radio interference regulations Copyright Restrictions © 1998, 1999 TRANSITION All rights reserved. No part of this – graphic, electronic, Trademark All registered 33044. Minneapolis, MN 55344 USA 100BASE-TX/100BASE-FX Slide-In-Module Media Converters C/E- 100BTX-FRL-03, C/E- 100BTX-FRL-03(SC), C/E- 100BTX-FRL-03(SM) USER’S GUIDE The TRANSITION Networks 100BASE-TX to 100BASE-FX slide-in-module media converters, C/ E-100BTX-FRL-03, C/ E-100BTX-FRL-03(SC) and C/ E-100BTX-FRL-03(SM), which are designed to be installed in the TRANSITION Networks Media Conversion Center, E-MCC-1600, connect 100BASE-TX unshielded twisted pair cable to 100BASEFX multimode OR singlemode fiber-optic cable. All media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode. An MDI/MDI-X switch allows straight-through twisted-pair cable to be used for crossover 100BASE-TX connections. C/E-100BTX-FRL-03 Provides an RJ-45 twisted pair 100BASE-TX connector and a set of RX (receive) and TX (transmit) ST 100BASE-FX connectors to multimode fiber-optic cable. 100BASE-FX Multimode Fiber 100BASE-TX Copper C/E-100BTX-FRL -03 P 100BASE-FX 100BASE-TX Fast Ethernet C/100BTX-FRL-03 C/E-100BTX-FRL-03(SC) Provides an RJ-45 twisted pair 100BASE-TX connector and an RX (receive) and TX (transmit) SC 100BASE-FX connector to multimode fiber-optic cable. 100BASE-FX Multimode Fiber 100BASE-TX Copper C/E-100BTX-FRL -03 P 100BASE-FX 100BASE-TX Fast Ethernet C/100BTX- FRL- 03(SC) C/E-100BTX-FRL-03(SM) Provides an RJ-45 twisted pair 100BASE-connector and an RX (receive) and TX (transmit) SC 100BASE-FX connector to singlemode fiber-optic cable. 100BASE-FX Singlemode Fiber 100BASE-TX Coppe...
Эта инструкция также подходит к моделям:Ресиверы и усилители - C/E-100BTX-FRL-03(SC) (57.72 kb)
Ресиверы и усилители - C/E-100BTX-FRL-03(SM) (57.72 kb)