Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note that 7.1-channel MPEG signals are mixed down to 5.1-channel signals. D-2 : Connecting to a digital jack This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. z Hints • For connection D-2 For correct speaker placement, refer to the instructions of the connected components. • To enhance the sound performance: – Use high-performance speakers. – Use front, rear, and centre speakers of the same size and performance. – Place the subwoofer between the left and right front speakers. Notes For connection D-2 • After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “DTS” in Quick Setup (page 31). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” in “AUDIO SETUP” to “MPEG” (pages 81). Otherwise, no sound or a loud noise will come from the speakers. • When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 82). • Super Audio CD audio signals are not output from the digital jack. Step 3: Connecting the Mains Lead Plug the player and TV mains lead (power cord) into a mains. Step 4: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press > (or turn the ./> dial on the player clockwise). To return to the previous adjustment, press . (or turn the ./> dial on the player counterclockwise). Hookups ./> X/x ENTER [/1 1 Turn on the TV. 2 Press [/1. 3 Switch the input selector on your TV so that the signal from the player appears on the TV screen. “Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message does not appear, select “QUICK” under “SETUP” in the Control 5 Press X/x to select a language. The player uses the language selected here to display the menu and subtitles as well. LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ITALIANO ESPANOL NEDERLANDS DANSK SVENSKA FRANCAIS ENGLISH ENGLISH DEUTSCH Menu to run Quick Setup (page 75). 4 Press ENTER without inserting a disc. The Setup Display for selecting the language used in the on-screen display appears. The available languages differ depending upon the player model. ,continued 6 Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: 16:9 BACKGROUND: 4:3 LETTER BOX BLACK LEVEL: 4:3 PAN SCAN BLACK LEVEL (COMPONENT OUT): OFF COMPONENT OUT:INTERLACE 4:3 OUTPUT: FULL LINE: VIDEO 7 Press X/x to select the setting that matches your TV type. . If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 76) . If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 76) 8 Press ENTER. The Setup Display for selecting the type of video signal output from the COMPONENT VIDEO OUT jacks appears. INTERLACECOMPONENT OUT: 4:3 OUTPUT: PROGRESSIVELINE: OFF INTERLACE SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: OFF BLACK LEVEL (COMPONENT OUT): OFF 9 Press X/x to select the type of signals you wish to output to your TV. Select “PROGRESSIVE” only if you have made video pattern A (page 20) and wish to view progressive video signals. . If you have a interlace format TV (standard TV) • INTERLACE (page 77) . If you have a progressive format TV • PROGRESSIVE (page 77) . If you intend to set “LINE” to“RGB” in step 11 • OFF (page 77) 10Press ENTER. The Setup Display for selecting the type of video signal output from the LINE 1 (RGB)-TV jack appears. SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: OFF BLACK LEVEL (COMPONENT OUT): OFF COMPONENT OUT: INTERLACE 4:3 OUTPUT: FULL LINE: VIDEO VIDEO S VIDEO RGB 11Press X/x to select the type of signal you want to output from the LINE 1 (RGB)-TV jack. If you select “INTERLACE” or “PROGRESSIVE” in step 9, you cannot select “RGB.” . Video signals • VIDEO (pages 78) . S video signals • S VIDEO (pages 78) . RGB signals • RGB (pages 78) 12Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. Is this player connected to an amplifier (receiver)? Select the type of jack you are using. AUDIO OUTPUT L/R DIGITAL OUTPUT DIGITAL & 5.1CH OUTPUT YES NO 13Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. Choose the item that matches the audio connection you selected on pages 26 to 29 ( through A ). D A • If you connect just a TV and nothing else, select “NO.” Quick Setup is finished and connections are complete. • Select “AUDIO OUTPUT L/R.” Quick B-1 C-1 B-1 C-1 Setup is finished and connections are complete. B-2 C-2 D-2 • Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears. D-1 or both D-1 and D-2 • Select “DIGITAL & 5.1CH OUTPUT...