Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Retain these instructions for future reference. Refer to the applicable Material Safety Data Sheet and material container label for each material to be sprayed before using this 3M equipment. Intended Use: Each 3M™ Automatic HVLP Spray Gun is intended for use by professionals who are familiar with the possible applicable safety hazards. They are intended to deliver the desired production speed and finish quality for all commonly used coatings. The spray gun must be set up as specified in the 3M™ Automatic HVLP Spray Gun Owner’s Manual. It has not been evaluated for other uses. Explanation Of Signal Word Consequences WARNING: Indicates a hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury. Explanation of Product Safety Label Symbols Attention: Read accompanying documentation 3 2 WARNING To reduce the risks associated with all residual hazards: • Read, understand, follow and retain for future reference all safety statements in each applicable equipment owner’s manual and refer to the applicable Material Safety Data Sheet & material container label for each material to be sprayed before using your 3M equipment. • This equipment is to be used only by professionals familiar with the possible applicable safety hazards. • Do not use this product around unsupervised children. • Never modify any part of this product. • Always comply with local, state and national codes governing ventilation, fire protection, operation, maintenance, housekeeping and disposal plus all safety statements in applicable owner manuals, MSDS and material container labels. To reduce the risks associated with chemical exposure: • Never point a spray gun at anyone else or place any part of your body in front of a spray nozzle. • Check spray equipment for damage and proper function before use. Repair/replace worn, damaged or malfunctioning components. • Always wear appropriate, approved personal protective equipment for eye, skin, respiratory and hearing protection per the applicable MSDS and material container labels at all times when spraying. To reduce the risks associated with fire and explosion: • Must maintain adequate ventilation per applicable MSDS and material container labels for each material being sprayed in the work area. • All ignition sources such as smoking must be kept out of the spray area. • Always maintain a readily available, approved fire extinguisher or other approved fire fighting equipment in the spray area. • Never use solvents containing Methylene Chloride and Trichloromethane for any reason to avoid a possible violent, explosive chemical reaction when exposed to aluminum or zinc (refer to the manufacturer’s MSDS or contact material supplier if there is any doubt to confirm compatibility). 3 CAUTION To reduce the risks associated with lifting and handling: • Always follow proper lifting and handling practices when moving system components. To reduce the risks associated with tripping, falling and tipping: • Route air hoses away from traffic areas. To reduce the risks associated with hazardous air pressure: • Maintain spray equipment per 3M care and cleaning instructions in the applicable owner’s manual. • Ensure air input pressure and all applicator system regulators are properly adjusted prior to each use. • Always follow required air pressure relief procedures for relieving air pressure from the unit. To reduce the risks associated with compression spring release: • Maintain a firm grip on fluid adjustment knob when removing. To reduce the risks associated with environmental contamination: • Spray materials, solvents, other cleaning materials and electronic components must be disposed of per federal, state and local regulations. 3 4 Spray Gun Overview 3M spray guns were designed from the inside out for the effective, efficient, economical application of paints, adhesives, coatings and finishes. These spray guns deliver large spray patterns with very low overspray. The soft, tight, adjustable pattern with complete atomization results in a high finish quality and absolute control. Each light weight spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs. 3M’s Automatic HVLP spray guns deliver superior atomization for a wide range of coatings. The standard spray gun body is made of light weight aluminum. The Zinc HVLP Automatic Spray Gun body is made of composite material. Manufactured for durability and dependability, both versions are easy to maintain for long-las...
Эта инструкция также подходит к моделям:Распылители краски - Series 55 (1.82 mb)
Распылители краски - Series 55ZZ (1.82 mb)
Распылители краски - Series 56 (1.82 mb)
Распылители краски - Series 56ZZ (1.82 mb)