Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
2 ApplicationChart................................. 2 SafetyGuidelines................................. 3 GeneralSafetyInformation ........................ 3 AssemblyInstructions ............................. 6 Preparation...................................... 6 SprayingInstructions.............................. 8 Cleanup........................................ 10 Storage........................................ 14 SprayGunMaintenance.......................... 15 MaintenanceChart.............................. 16 Specifications................................... 17 ReplacementParts............................... 18 Troubleshooting................................. 21 ForceFeedingPump ............................. 23 Warranty....................................... 24 Description Airless paint sprayers are capable of spraying a wide variety of latex, oil-based, and alkyd paints, as well as stains, preservatives and other non-abrasive finishes. These sprayers are also powerful and versatile enough to be used with a variety of options (roller attachment, extra lengths of hose, etc.) to make it an even more efficient tool. NOTE: Guns pictured in illustrations may be different than the one included with your unit. Application Chart Coating Can Use Do Not Use Tip Size ** Spray Pressure Oil Base Stain x .011 -.013” 800 + psi Wood Sealer x .011 -.013” 800 + psi Concrete Sealer x .011 -.013” 800 + psi Enamel x .011 -.013” 1500 + psi Varnish x .011 -.017” 1500 + psi Non-Metal Flake Aluminum Paint x .011 -.017” 1500 + psi Vinyl Latex Paint x .013 -.017” 1700 + psi Vinyl / Acrylic Latex Paint x .013 -.017” ** 1700 + psi Acrylic Latex Paint x .013 -.017” 1700 + psi Oil Base Paint x .013 -.017” 1700 + psi Oil and Water Based Primer x .013 -.017” 1700 + psi V. V/A & A Latex Stain x .013” 1700 + psi Textured Coatings x N/A Elastomerics x N/A Asphalt Coating x N/A Wood Restorer x N/A Block Filler x N/A All Other Materials Not Listed -Call Technical Support at 1-800-626-4401. **Refer to maximum tip size in the specifications chart (See page 17). 2 Operating Instructions and Assembly Instructions Airless Paint Sprayers Safety Guidelines ImPOrTANT SAFETy INSTrUCTIONS SAvE ThESE INSTrUCTIONS This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. warning indicates a potentially hazardous situation which, if not avoided, coulD result in death or serious injury. caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, MAY cause damage to equipment. Unpacking After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service. Do not operate unit if damaged during shipping, handling or use. Damage may result in bursting and cause injury or property damage. General Safety Information CAlIFOrNIA PrOPOSITION 65 This product or its power cord may contain chemicals, including lead, known to the State of california to cause cancer and birth defects or other reproductive harm. wash hands after handling. GENErAl SAFETy 1. SAVE THESE INSTRUCTIONS - To reduce the risks of fire or explosion, electrical MANUAL shock, and injury to persons, read and understand all instructions included in this manual. Be thoroughly familiar with the controls and the proper use of the equipment. 2. Always wear a mask or respirator and eye protection when painting. Be certain mask or respirator will provide necessary protection against inhalation of harmful vapors. 3. Keep visitors away and NEVER allow children or pets in the work area. 4. Do not smoke or eat when spraying paint, insecticides, or other flammable substances. 5. Always work in a clean environment. To avoid injury and damage to the workpiece, do not aim the spray gun at any dust or debris. 6. When spraying and cleaning, always follow the instructions and safety precautions provided by the material manufacturer (Refer to MSDS). ElECTrICAl ShOCk hAzArD: . Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and in the United States, the Occupational Safety and Health Act (OSHA). . This product requires a grounded 120V, 15 Amp circuit (See Figure 1). TESTRESETFigure 1 - Grounding Grounding Pin NOTE: Applies to 120V countries only. . If the power receptacles available will not fit this equipment’s power cord, then have an appropriate power receptacle installed by a certified electrician. . Only qualified electricians or service personnel should perform maintenance on the electrical components of this equipment. . Do not modify any of the electrical compon...
Эта инструкция также подходит к моделям:Распылители краски - PS231B (7.95 mb)
Распылители краски - PS240C (7.95 mb)
Распылители краски - PS240F (7.95 mb)
Распылители краски - PS250B (7.95 mb)