PROGRAMMING TRANSMITTERS: NOTE: It is important to remember that during the programming mode, each individual step must be completed within 15 seconds ofthe previous step. If the 15 second time limit expires betweensteps, the unit will automatically exit the program mode. Thisis indicated by a long chirp from the siren. Non alarm models will flash the parking lights only to confirm thetransmitter code has been learned and stored. NOTE: Because the system may be capable of sounding a siren, the v

This transmitter can be used with any Audiovox unit color coded with an Orange LED in the receiver. To program this transmitter into your remote start upgrade unit: 1) Turn the ignition to the on position. 2) Press and release the programming switch 3 times. 3) Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes indicating the transmitter has been learned. 4) Repeat step 3 for each transmitter up to a total of 4. Turn the ignition of

Behind the Eton Sound's clean and uncluttered design hides a multitude of technology facilitating higher sound reproduction and better reception. 1 ETONSOUND100OPERATIONMANUALETONSOUND100OPERATIONMANUAL WHAT THE ETON SOUND RADIO INCLUDES Owner’s manual; remote control. PREPARING THE REMOTE FOR USE Grip the plastic piece on the bottom of the remote unit and pull it out. POWERING THE ETON SOUND RADIO Plug the Eton Sound Radio Power Cord into an AC (mains) outlet. When it is first plugged in, it wi

Although this transmitter can be programmed into any of the Audiovox remote start and/or alarm, remote start systems, it will offer limited use and should be used for the remote start upgrade only. To program this transmitter into your remote start upgrade unit: 1) Turn the ignition to the on position. 2) Press and release the programming switch 3 times. 3) Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes, indicating the transmitter

Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. No mezcle baterias viejas y nuevas. No mezcle baterias alcalinas, estandar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.). ATTENTION RISQUE D' ELECTROCUTION NE PAS OUVRIR CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONN

Lock and arm/unlock and disarm. May be programmed to unlock driver's door or all doors. Also will initiate and terminate *Panic. Pulsed or switched output to control Remote Trunk Release or optional device connected to channel 3. When pressed and release two times, will provide pulsed output or activate the Remote Start option when installed. When so equipped, this button can be used to operate an optional device connected to channel 4. When so equipped, this button can be used to operate an opt

The transmitters come as either handheld units or pushplate ready units, which are easily integrated into BEA’s line of pushplates. 300/390 MHz TRANSMITTERS & RECEIVERSUSER’S GUIDE 1 Description STYLE 300 MHz (Analog) 390 MHz (Digital) HANDHELD STANDARD 10T300HH 10TD390HH 2-BUTTON 10T300HHDBL 4-BUTTON 10T300HH4 KEYCHAIN 10T300KEYCHAIN 10TD390KEYCHAIN PUSHPLATE RELAY MINI 10T300MINIPB 10TD390WC STANDARD 10T300PB 10TD390PB RECEIVER STANDARD 10R300 10RD390 ANALOG 300 MHz & DIGITAL 390 MHz ANALOG -

All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock. 2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty. 75.5116.03 EN 20080505 Page 1 of 2 3 Receiver Setup ANALOG RECEIVERS (300 MHz) 1. Manually set access codes using the dipswitches on receiver. A. Use a pencil or similar object to set the co

2. Snap the battery into the battery terminals. Then put the battery in the compartment. 6 12-1607.fm Page 7 Friday, July 9, 1999 9:32 AM 3. Replace the cover. The BATTERY SENTINEL lights automatically if the battery needs to be replaced or is not installed. USING EARPHONES To listen in privacy, turn VOLUME to its lowest setting and plug a monaural earphone with a 1/8-inch plug into the EARPHONE jack. Your local Radio Shack store has a complete line of earphones. Listening Safely To protect your